2,591 Brands 544 Categories All Departments
not yet rated review & rate
AEMC AEMC K100 Current Probe AEMC K100
Code: UP-UA-AEMCK100

Buy now, pay later! Now when you check out at OpticsPlanet with PayPal, you can apply for PayPal's 6 month no payments, no interest option through PayPal Credit. PayPal Credit available in USA only and orders must be over $99 to qualify. Click here to learn more.

AEMC K100 DC/AC MicroProbes - Current Probe Product Info

The AEMC K100 Current Probe can detect electrical current as low as 100µA in either AC or DC. This current probe has a proportional 1mV/mA output for direct readings on DMMs, loggers and oscilloscopes with no need for probe ranging or signal filtering, and is designed for low-current applications. Small size, long battery life, easy operation, and extreme sensitivity make the AEMC Current MicroProbe a fine choice for anyone who deals with small current measurements. The AEMC Instruments K100 AC/DC Electrical Current Probe has innumerable applications from industrial to seafaring and military uses.

AEMC AEMC K100: AEMC K100 Current Probe

Specifications for Zero Point EAP Expedient Action Pocket:

Nominal Range: 0 to 3 Arms / o to 4.5 Adc
Measurement Range: 0 to +- 4.5A
Output Signal: <100uV, DC to 3kHz
Accuracy (4.5A range) AC: +-2.0% of Reading +- 200uA
Accuracy (4.5A range) DC: +-1.0% of Reading +- 200uA
Overload: Red LED indicates momentary or continuous overload
Frequency Range: DC to 2kHz (@ -3dB sine)
Load Impedance: 200 ohms
Working/Common Mode Voltage: 300V, EM 61010-1, Cat. II
Battery: 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22 (Approx. 20 hours life)
Output Termination: 4mm Safety Banana Plugs
Operating Temperature: -14 to 131 F (-10 to 55 C)
Storage Temperature: -40 to 176F (-40 to 80 C)
Operating Relative Humidity: <95% @ <35 C, 75% @ 55C
Zero Adjustment: +-25mA approximate by 10 turn knob at base of case
Maximum conductor size: 3/16", 0.180" (4.5mm)
Dimensions: Probe, 4.4 x 0.6 x 1" (111x15x25mm); Electronic module
Weight: 9 oz (250g)
Electrical: EN 61010-2-32
Double Insulation: Yes
CE Mark: Yes

Features of AEMC Instruments DC/AC Microprobe Model K100:

  • Measures extremely low level DC from 100mA
  • Outputs signal proportional to total current (DC + AC)
  • Low noise
  • Ultra-compact size and non-contact clamp-on convenience
  • Simple plug-in operation
  • Designed for use with DMMs and oscilloscopes
  • Accurate display of waveforms
  • No range or mode (AC/DC) switching required
  • Extended battery life
  • Red LED indicated momentary or continuous overload
  • Green LED indicates power and battery condition

Applications of the AEMC MicroProbe K100:

  • Industrial process controls (4 to 20mA current loops)
  • Electronic circuit design, testing and repair
  • Automobile wiring and engine control systems
  • Avionics systems maintenance and repair
  • Shipboard maintenance and repair
  • Fault and signal location in complex networks
  • Ground and leakage current measurement
  • Pre-deployment testing of power-conscious equipment

Package Contents:

  • AEMC K100 DC/AC Current Probe

AEMC K100 DC/AC MicroProbes - Current Probe Related Products

AEMC K100 DC/AC MicroProbes - Current Probe Comments