Labconco RapidVap Vacuum Evaporation System, Labconco Aluminum Blocks For 69 x 15 Ml Conical Centrifuge Tubes is a reliable and dependable addition to the Labconco Centrifuges family of products. Combining top-notch and uncompromising quality with an affordable price, the Labconco RapidVap Vacuum Evaporation System, Labconco Aluminum Blocks For 69 x 15 Ml Conical Centrifuge Tubes 7496300/ 13500-072 can fulfill your laboratory needs while still offering a great value for the money.
Product Category Description:
RapidVap* Vacuum Evaporation System, Labconco*
System combines vortex motion, heat, and vacuum to quickly evaporate solvents from multiple biological or analytical samples. The microprocessor-controlled agitation at 1000rpm causes the liquid sample to form a vortex configuration that helps prevent bumping and greatly increases the surface area, enhancing evaporation. Rear-mounted vacuum port and electrical receptacle allow connection to a vacuum pump.
Memory stores 1 to 9 programs. Microprocessor-controlled programming for vortex speed from 0 to 100%; heat from OFF to 100°C; time from 1 to 999 minutes; vacuum level from 0 to 999mBar. LCD for display of program number, actual and set point, vortex speeds, temperatures, time remaining, and point vacuum level. Control panel with run/stop button, preheat/end alarm button and indicator light, set point selection buttons, and increase/decrease programming buttons. Audible alarm for timed end point. Audible/visual alarm for endpoint detected by temperature sensors at heater and block.
System consists of a glacier white and charcoal epoxy-coated aluminum base with thermoplastic upper housing, a fluoropolymer resin-coated cast aluminum chamber and a 1.3cm (1/2") thick glass lid with safety switch/alarm. Models with lid heater are available for applications involving water or other high boiling point solvents. Lid heater increases visibility and eliminates fogging.
The 230V models (without RS-232 interface) are CE marked.
Ordering Information: Vacuum pump hose and clamps are provided. The 115V models include a 2m (6'6") three-wire cord and a 20A plug. The 230V models include a 2m (6'6") three-wire cord and a 15A plug. Vacuum pumps, traps, and interchangeable fluoropolymer resin-coated aluminum blocks are sold separately. Contact your VWR representative to select the appropriate vacuum pump and trap.