Product Category Description:

System combines vortex motion, heat, and vacuum to quickly evaporate solvents from multiple biological or analytical samples. The microprocessor-controlled agitation at 1000rpm causes the liquid sample to form a vortex configuration that helps prevent bumping and greatly increases the surface area, enhancing evaporation. Rear-mounted vacuum port and electrical receptacle allow connection to a vacuum pump.

Memory stores 1 to 9 programs. Microprocessor-controlled programming for vortex speed from 0 to 100%; heat from OFF to 100°C; time from 1 to 999 minutes; vacuum level from 0 to 999mBar. LCD for display of program number, actual and set point, vortex speeds, temperatures, time remaining, and point vacuum level. Control panel with run/stop button, preheat/end alarm button and indicator light, set point selection buttons, and increase/decrease programming buttons. Audible alarm for timed end point. Audible/visual alarm for endpoint detected by temperature sensors at heater and block.

System consists of a glacier white and charcoal epoxy-coated aluminum base with thermoplastic upper housing, a fluoropolymer resin-coated cast aluminum chamber and a 1.3cm (1/2") thick glass lid with safety switch/alarm. Models with lid heater are available for applications involving water or other high boiling point solvents. Lid heater increases visibility and eliminates fogging.

The 230V models (without RS-232 interface) are CE marked.

Ordering Information: Vacuum pump hose and clamps are provided. The 115V models include a 2m (6'6") three-wire cord and a 20A plug. The 230V models include a 2m (6'6") three-wire cord and a 15A plug. Vacuum pumps, traps, and interchangeable fluoropolymer resin-coated aluminum blocks are sold separately. Contact your VWR representative to select the appropriate vacuum pump and trap.

Specifications for Labconco RapidVap Vacuum Evaporation System, Labconco 7900000 Rapidvap System, 115V, 60Hz, 7A:

Description:		RapidVap System, 115V, 60Hz, 7A
Labconco No.:		7900000
Speed:		1000 rpm
Temperature Range:		Ambient to 100°C (212°F)
Dimensions:		52.8W x 46.7D x 34.3H cm
Shipping Weight:		45 kg (100 lbs.)

(Please note that the description and stock photo may not correspond to the specific model listed above)

We offer only genuine Labconco products, authorized for sale in the U.S. and other markets, so you can be sure that you are buying authentic Centrifuges with a full manufacturer's warranty in addition to our own 100% Satisfaction Guarantee. We are your premier online distributor for Labconco Centrifuges. We are an authorized supplier to all federal and state government agencies, as well as to research and educational institutions, and can facilitate volume orders on many types of laboratory equipment, lab consumables, and other products to help fulfill your specific needs. We offer Free Shipping and FREE USPS shipping to APO and FPO addresses on all orders in our store over $29.95. Please refer to our APO/FPO Shipping and Export Restrictions for more information on export to APO/FPO addresses.

In addition to the Labconco RapidVap Vacuum Evaporation System, Labconco Rapidvap System, 115V, 60Hz, 7A 7900000/ 26676-000, we carry a full complement of Centrifuges as well as other product offerings from Labconco. We also carry a full line of Labconco accessories to help meet your laboratory and scientific needs.

For a complete selection of Labconco Centrifuges, please visit our Labconco page. For more brand name Centrifuges please visit our Centrifuges store section. To see our complete line of lab, medical, industrial, and scientific products, please see our science and lab equipment online catalog.