2,538 Brands 453 Categories All Departments

What mount, rings & scope

Unsure of the best laser technology for you? Our pros are here to answer your questions.

What mount, rings & scope

Postby lvaught on Fri Feb 15, 2008 12:31 pm

What mounts, rings & scope would you recommend for a Taurus Model 608 SS 8 3/8 barrell .357 mag. Thinking about a 2x8, but maybe a red dot.
lvaught
 
Posts: 2
Joined: Wed Feb 13, 2008 10:18 am

Postby Steven_L on Fri Feb 15, 2008 7:11 pm

We don't have a mount for you at this time. Try Brownell's at 800-741-0015. For a red dot to live a while on your gun with .357 loads it has to be a good one. Aimpoint, EOTech, or Docter, I would suggest. You can get by with a lot less if you'll use .38 target loads. Then I would suggest a Tasco Propoint for a scope I wouldn't do anything less than a Nikon 6560 for longevity with hot loads, but again, with milder loads you can get by with a lot less, like this Simmons 807732.
Aim Hard!

Steve at OpticsPlanet
http://www.opticsplanet.net

Phone: (800) 504-5897
Fax: (847) 919-3003
Steven_L
Site Admin
 
Posts: 2247
Joined: Fri May 19, 2006 10:35 am

Re: What mount, rings & scope

Postby pauldavid on Thu Jul 09, 2009 7:30 pm

you can mount a b-square bq42306 which is stainless. I have one mounted on my Taurus 608 ss .357 and no drilling or tapping, it uses four screws that fit through the vent rib.
pauldavid