YUKON 24022wp 3/42 SEA WOLF

Good day,my YUKON 24022wp 3/42 has suddenly developed a fault when powering up,the rear reticle gives of a flickering pulse and sound and does not hold the light amplification and slowly fades.This is in the normal mode without engaging the IR mode,can anybody perhaps give me an explanation as to why

Hi

We don't do repair or service work, here at OpticsPlanet. You should visit with Yukon on this. Contact Yukon at 1-817-453-9966 or visit their website at http://www.yukonamericas.com/

gordon wrote:Good day,my YUKON 24022wp 3/42 has suddenly developed a fault when powering up,the rear reticle gives of a flickering pulse and sound and does not hold the light amplification and slowly fades.This is in the normal mode without engaging the IR mode,can anybody perhaps give me an explanation as to why

I got my Yukon Sea Wolf on April 16th.
At night in the mountains, I turned on the power, was flickering and slowly went dark and so I turned on my IR light build-in,
suddenly the unit made a clicking noise and the bottom of the unit got very warm. I turned the unit power off.
Never recovered. A new unit, handled with care --

Optics Planet does not repair, so that means we will have to send our units to Yukon directly ?
Will they repair it FOC ?

Advise needed --- Kind regards,
Pastor Georg O.P. Eschert
gope@zaa.att.ne.jp

Yes, you will need to visit with Yukon for repair, but that is still within our 30 day return period, so contact our Customer Service for an RMA and a possible replacement.

Contact Yukon at 1-817-453-9966 or visit their website at http://www.yukonamericas.com/