Parts and Head

Todd · Guest

Hi,

I just bought an AL-2000 laboroscope from someone who never used it. But after setting it up, I realized that the is supposed to be a part which fits into the hole behind the condenser, and it isn't there.

Can I buy that little part. Without it, the condenser sits too far back.

Also, my eyes are very narrow set and I can't adjust the eyepieces to be narrow enough. Do you know of any solutions? I can buy a used Zeis binocular head with a 43mm dovetail which can be adjusted for narrower set eyes. Is that a workable option?

Thanks you,

Todd

Jne_K · Site Admin Joined: 24 Sep 2003 Posts: 5024

Hi

Please email us at sales@opticsplanet.com and we will forward your request to LOMO.
_________________
Thanks for posting with us
Joanie K - Your personal optics expert

Forum: http://www.opticsplanet.com/msgboard
Blog: http://blog.opticsplanet.com/
Store: http://www.opticsplanet.net/

Phone: 847-513-6201
Fax: 847-919-3003

Todd · Guest

Thank you. And I realized that I don't need a different head. I simply didn't have the dovetail in all the way, so I was getting double vision because of that, not because my intra pupilary distance was less than the scope could do.

I'm adding this just because I don't want anyone to think the adjustment is less than other scopes. I measured, an it is the same as the zeis, 55mm.

I'll email you at sales. Thanks,

Todd

Jne_K · Site Admin Joined: 24 Sep 2003 Posts: 5024

Thanks, Todd. Glad to help.
_________________
Thanks for posting with us
Joanie K - Your personal optics expert

Forum: http://www.opticsplanet.com/msgboard
Blog: http://blog.opticsplanet.com/
Store: http://www.opticsplanet.net/

Phone: 847-513-6201
Fax: 847-919-3003