Products
2,519 Brands 483 Categories All Departments

barska scopes any good?

Post a reply


Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:D :) :( :o :shock: :? 8) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :wink: :!: :?: :idea: :arrow: :| :mrgreen:
BBCode is ON
[img] is OFF
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: barska scopes any good?

Re: barska scopes any good?

Post by glorious art on Fri Nov 21, 2014 12:43 pm

Oil paintings of family members used to be the preserve of the rich and famous. Prohibitively expensive – the only way the likes of me and you could get one was if we had a family member that was an artist. Thankfully those days are long gone because with the advent of the internet, increased competition has made these family portraits more affordable. You can now have your chosen photograph painted in oils on canvas at a fraction of the cost it used to be. If you are already thinking of having a painting made from a photograph be sure to check out the quality of the art produced by the company you deal with. A good company that has an excellent reputation in this field is: http://www.artgloriousart.com/Photo-to- ... s/1817.htm Check them out today, they guarantee you won’t be disappointed.

Scope Mount for the Rem 243

Post by Tom on Wed Oct 15, 2014 5:20 pm

[quote="VA Shooter"]I've read review after review. I just purchased a Barska 3x12x50 with the illuminated reticle. And I honestly have to say it's not that bad of a scope. I have it mounted on a Remmington 243. As for 2nd tier scopes are concerned I have to say it's the best of the bunch. I have a 25-06 mounted with a Nikon Monarch 3x9x40 with the BDC. And where I hunt the Barska is just as good. In most of my hunting situations my shots come from 50 yds are less. I also have a 7mm Mag with a leaupold VarX 3, 3x9x50 with AO. When I rate them, the Nikon is best for clarity. As for features I give the nod, to the Leupold with the Barska a VERY close 2nd place. So if your like me, when must of your hunting shots are in the 50 to 100 yd range. Then do yourself a favor and buy the Barska. You and your wallet won't be dissapointed.

Jeff Young CSSGB[/quot


What type of scope mount did you have to get for your Rem 243...
Type and model number if possible...Tks
duramaxtc2015@gmail.com.....

Re: barska scopes any good?

Post by GaCop on Mon Aug 11, 2014 7:50 am

I've had a Barska 1.5X6X42 scope mounted on both a Marlin 45-70 and a 444. So far, it has held up to the recoil of some shoulder busting loads (which totally surprised me). I used to be totally down on Barska but after seeing the performance of this one, I gotta think, maybe QC and quality has improved some. I certainly won't make a habit of buying Barska in the future as I don't want to tempt fate but I can't complain about the one I've got.

Tom

Re: barska scopes any good?

Post by CentralTexasJackhole on Sun May 18, 2014 9:37 am

No doubt the pricier scopes are better in the long run. I did put a newer $50 3x9 Barska on a .50 cal Triumph muzzle loader, sighted it in, and it is driving nails at 50 meters and about 1 to 1 1/2 inch groups at 100 meters. That's not bad for a muzzle loader. This was last year, and it was still dead on this year after being bumped around and feeling the recoil from 135 grains of powder. Did fine in sub-freezing temps. Just put one on a 10/22. It works just fine.

I think you run a greater chance of disappointment with them, yes. They most likely have a higher failure rate and lower QC check standards. If I had had the 300-400 bucks to blow on a Leo, I might have done that. I think the quality of the Barskas have improved slightly (just slightly) over the past couple of years. If purchasing, I would suggest a retailer like Wal-mart (I hate to say that) and use their customer service to replace initially failing scopes.

I'm going to try one of the higher dollar Barska jobs out on a .30-06, soon. We shall see.

Final verdict. You get what you pay for, but that doesn't mean you can't have a decent scope for under a hundred bucks.

Re: barska scopes any good?

Post by jmarine1 on Thu Feb 20, 2014 1:14 pm

s it totally unusual to mount an EoTech red dot holographic scope along with a AO glass scope on an AR-15?
And if it is fine to do so, what would be the best set up for them? Would you place the red dot on a 45 degree angle and have the glass rifle scope on the top ? Any advice would be greatly appreciated. thank you

John G

Re: barska scopes any good?

Post by fenwa on Mon Dec 02, 2013 11:38 am

I purchased a Barska scope and I would never buy one again. The optics are of very poor quality and prone to cracking. When I called customer service they told me that they would repair my scope but that it was not recommended for a shotgun. Two problems with that. The first is that this did not appear in any of their literature. The second problem is that once replaced, the next time the scope would be used would be next year, well after the warranty expires This was Barska's failure of documentation, not a failure in my research. The put their minion Jack out there to take the brunt of criticism but he offers no customer service and refuses to refer to a supervisor. Next time I will spend my money elsewhere and I would encourage everyone else to do the same.

Re: barska scopes any good?

Post by airborneveteran on Sun Jun 09, 2013 9:00 am

Well, I have no illusions about what I bought but for around $30 I bought a Barska 4x32 Plinker-22 scope. I figured it would at a minimum give me a cheap backup set of 1 inch silver rings and I have two CZ 452 silhouette models that are always dressed in silver.

Besides an extra inexpensive set of silver rings, what I ended up with is an acceptable 22LR plinking scope for the money. To be clear the scope itself has no business on my CZ's and I would only compete with the Barska rings if I was in a bind but they are a handy backup. However, the $30 I spent is as much money as I want to have tied up in a scope for the stock Ruger Charger pistol that is often bumping around under the seat my vehicle and that is what I find this scope useful for. Your mileage may vary.

Re: barska scopes any good?

Post by superchevy1080 on Mon Feb 25, 2013 4:56 pm

just buy a red field scope they are made by Leupold. The price is way less than the Leupold scopes but use all leupold parts and glass.

Re: barska scopes any good?

Post by joeg9100 on Mon Feb 04, 2013 4:37 pm

Well great topic. BTW I own a Leupold 3x9x32 vari x scope it is 28 years old. Sounds to me as Barska is a ODM for other companies if you have to buy the cheap scope buy it from them not Barska. Here is why, Tasco has someone watching the quality coming out of that factory and their specification may be tighter that what Barska ships. Don't assume you will get the same scope, you may not. I worked for 3 computer companies sourcing Displays out of Asia and trust me until the factory company get lots of expertise and engineering resources they will not be able or might even sell the rejects of other OEMs. They don't make much money building for OEM's so nothing can go to waste therefore they sell their own brand. Eventually they will get good if they work at it.
Given that optics cost have come down a lot over the years. My Vari X cost nearly $300 28 years ago. Today I can buy a scope for $150 with better optics. However it won't be a Leupold and in 28 years from now that scope will be worthless. I can sell My vari X for at least $175 because who ever buys it is guaranteed to function to specification. If not they can send it to Leupold for free repair. I had this scope on a Winchester 9422WMR lever action rifle and shot thousands of rounds though the gun. I could not get the rifle to center and thought I had some how hammered the scope. So I sent it back with a letter explaining what had happened. I can imagine how hard they were laughing when they read my note thinking I had somehow ruined their scope by shooting thousands of rounds of .22 Mag on it. They politely centered it shock tested it and sent it back with a report for no charge.
This scope sits on my 917 now and it is not enough scope for me. I am 63 now and The .17 needs more magnification due to longer range and still small targets. The Leupold has served me well but this kind of scope will be very expensive so I will go with other brands. I won't need it to last 40 years either. But you can bet I will not buy a Barska because it won't pass the optics test. I can look at Nikon or Redfield even Bushnell optics as I have had good luck with them too.
If I were young and had a expensive rifle I would not hesitate to go with Leupold as in the long run your money is worth it.

Re: barska scopes any good?

Post by Blue on Fri Jan 18, 2013 8:02 pm

The wonderful thing about the internet is that you can get lots of negative feedback about anything. I bet eighteen year old cheerleaders would get trashed here as well. I have a small retail shop and although I would prefer to sell scopes of say a Redfield by Leupold on up through Leupold ,Burris and high end European scopes I do have a lot of customers whose budgets or inclinations do not take them to this price point. I have actually found the Barska products to outperform their price point . Certainly they have surprised me that they have performed satisfactorily in applications that I would not have recommened them for. I have only seen a few of them pack it in and the customers got good service from Barska when they sent them back for warranty. An important point to note is that they have what they refer to as a "Limited Lifetime" warranty on most of their products. It is limited to the original purchaser and he must have registered his warranty by mail or email shortly after the time of purchase. If you register your purchase they are great to deal with. If you don't register your ownership you are out of luck--no warranty. This factor allows a lower price point as there is not a built in long term insurance policy on the product. Most people doi not register their purchase or for the price of the product do not bother sending it back.--My observations anyway.

Re: barska scopes any good?

Post by john duncan on Fri Jan 18, 2013 7:31 pm

i bought a 8 by 32 50 mil only had it for two years the gases let go foged out i called to get it fixed cause i dont have my sales reiceat they want to charge me i got the box it came in bought it at duhams

Re: barska scopes any good?

Post by plinker of pinecones on Wed Jan 02, 2013 8:45 am

We don't kid ourselves about quality of low-priced scopes. For serious elk hunting we have serious scopes such as Leupold. For plinking a row of pine cones set up when out camping, my tri-focals don't seem to do the trick with iron sights anymore. A .22 doesn't have enough recoil to upset a scope and we don't camp and shoot during rain or weather cold enough to fog a lens. I guess we will never be able to confirm the claims of waterproof, fogproof and shockproof. For next to nothing in cost for a bit of plinking pine cones, our Barska's are as good as any.

Re: barska scopes any good?

Post by onetime on Sat Oct 27, 2012 10:00 pm

just wanted to say i bought a barska a couple three weeks ago after mounting it bore sighting it at 100 yards it was all over the paper small adjustments it was off the paper bore sighted 2 more times got it back on paper but ran out of elevation adjustment after 27 rounds threw a 7mm remmag i gave up !!!!!!!!!!will try one more time before i give it the JUNK rating !!!!!!!!!

Re: barska scopes any good?

Post by NOTSOMUCH on Wed Oct 10, 2012 12:12 pm

Ok, read all 52 reviews and it sounds like they are mixed, I have a feeling there are some haters out there just against trying new things, however with the glass remarks and all the same review on the lighted reticles, Id definitly have to say you get what you pay for, My man wants a new scope for his bday, we hunt every weekend different areas and different ranges, but I will tell you after reading all these, Im going with the Bushnell, or the Nikon, or perhaps I should check the old LOOP HOLDES out~ and if I find a cheap enough Barska, I may just get one to test myself, I must say I think that is what it will take cause there is so many mixed reviews and most of the decent ones I have a feeling the ppl are from China just by the way they speak! I work with International all day long and can usually decipher from where they come from, either that or they really do like the fact of disrespecting whoever raised them to tell everyone else how stupid they are! way to go out there! Good luck with the ones who are willing to try the new things out and if nothing else, can only get better!

Re: barska scopes any good?

Post by MrGman on Wed Aug 01, 2012 8:40 am

Quality is actually cheaper in cost than the "low cost" junk like BARFska. You pay for it once and it works and works and works, instead of having to buy it over and over again. There are plenty of good quality medium grade scopes in the $100 to $200 price range that will probably last a lifetime to choose from. No one ever has to really settle for this and then find out it just wasn't worth the entry price. So more reminders and evidence that BARFska is just a total waste of time and money to take the risk that you may get the one that actually does work right and last for a while is always good to see.


Billstaf wrote:I got the Barska 4X28 IR Electro scope for my AR. Fit and finish looked OK.

The scope never would hold a zero. Finally, the front lens just came completely loose inside the scope housing. I went to the Barska web site and asked about repair/replacement possibilities twice. They claim a response within 24 hours, but I have heard nothing back from them after either attempt.

As it is right now, this scope is worthless junk. Barska apparently isn't much interested in customer service. I've learned my lesson and will only purchase reliable optics in the future. I know they cost a lot more, but in the end it will be worth it.

What I will do is warn any others who are willing to listen about my experience with Barska. There are lots of gun forums for me to do this on.

Re: barska scopes any good?

Post by Billstaf on Fri Jul 27, 2012 11:07 pm

I got the Barska 4X28 IR Electro scope for my AR. Fit and finish looked OK.

The scope never would hold a zero. Finally, the front lens just came completely loose inside the scope housing. I went to the Barska web site and asked about repair/replacement possibilities twice. They claim a response within 24 hours, but I have heard nothing back from them after either attempt.

As it is right now, this scope is worthless junk. Barska apparently isn't much interested in customer service. I've learned my lesson and will only purchase reliable optics in the future. I know they cost a lot more, but in the end it will be worth it.

What I will do is warn any others who are willing to listen about my experience with Barska. There are lots of gun forums for me to do this on.

Re: barska scopes any good?

Post by Hogalator on Tue Jun 26, 2012 11:09 am

I mounted a Red Dot on my Kalashnikov. After approx 260rds the Red Dot IR w/ 2x mag literaly started coming apart. The Scope is 2 months old. I know that you get what you pay for but this scope is advertised as a Shock proof Tactical Scope. Absolute JUNK!

Re: barska scopes any good?

Post by Trevor_B on Mon Apr 09, 2012 9:04 am

I've had the opportunity to handle and use many brands, every one that we carry here and then countless more. Everything from the $10 Tasco to the $4000 Hensoldt. It is very true that price does reflect quality of optic. There is a Very noticeable difference from a $100 scope to a $1000 scope as well. First is is over clarity of the glass, lesser optics do not have bright and crisp images. Same magnification and objective, pricier brands DO have better glass and it is noticeable. This comes from the glass itself, but the coatings are a huge difference. better coatings mean more light transmission therefore a brighter picture. The turrets are another huge give away. When you spend a little more you will get a more solid turret that is dependable and repeatable. I know ever time I click a Nightforce 1/4 MOA turret, that bullet will move 1/4 moa the very next shot. On a scope under $200, it may take a few shots for the turret to settle in. I personally like to be able to shoot a box perfectly, and not have it look like a box with a circle around it.

Better glass, better coatings, repeatability, durability, construction, erector housing are just some of the features that determine what makes a better scope. People that disagree about glass might need to check the birding forums as well. I've never seen more scrutiny on optics, and its very valid. The differences are noticeable to trained eyes, and inches and mm's matter at 1000 yards.

there is always the right tool for the job. I am a huge fan of Nikon and their Monarch series suits my needs for the majority of my shooting. You DON'T always NEED to spend thousands on optics, a few hundred dollars can do the job a lot of the time. HOWEVER, there are differences that ARE very noticeable.

Re: barska scopes any good?

Post by just_a_guy on Sat Apr 07, 2012 3:41 pm

I know that in 99 times out of 100 you get what you pay for. but all I hear is that barska scopes are cheap and ok for the occasional shooter.
what makes them cheaper quality overall. I know that stuff made is China = crap but let's hear some details, what makes their glass inferior, let's list facts not opinions. thanks for the replies.

Re: barska scopes any good?

Post by akholic on Sat Mar 31, 2012 3:33 pm

I bought the 3x12 Ridgeline because I liked the P4 reticle.
It's been mounted on my Arsenal SA-M7 AK47 for the past 2 years and I have had zero issues with losing zero.
I even have this on a Russian sidemount dovetail scope base.

Pop it off to use iron sights, pop it on to go back to the scope. Still no shift in zero.
This scope has seen well over 2000 7.62x39mm rounds. Still dead on. Might not be true with a lesser priced AK(stamped versus milled), but I have had zero issues.

I did not use the supplied rings. Installed Burris Extreme Tactical Rings. Tightened down the rings "JUST ENOUGH TO HOLD THE SCOPE" (Still a gap between the top and bottom ring halves). I turly believe that too many times, people use low quality rings or overtighten the rings so as to crush or deform the tube. Then they wonder why scope components became loose after shooting.

Have my Savage Model 10 FCP-K in .308 on the way so am looking for another scope.

It's looking like another Barska will be riding atop the Savage.

Don't forget to read the dates of the reviews in forums and on-line review sights.
Good companies listen to consumer feedback and tend to improve quality year after year.

I would almost bet that a 2006 Barska scope is not the same as a 2012. It's probably better!
Good luck!

Top