2,532 Brands 453 Categories All Departments

Windage adjustment error at varying ranges, no wind

Post a reply


Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:D :) :( :o :shock: :? 8) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :wink: :!: :?: :idea: :arrow: :| :mrgreen:
BBCode is ON
[img] is OFF
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: Windage adjustment error at varying ranges, no wind

Re: Windage adjustment error at varying ranges, no wind

Post by Trevor_B on Tue Jun 19, 2012 2:14 pm

Sounds more like a mount problem. At least its an easy fix if it is just the mounts. I recommend going with a new set of rings, and possibly putting a little more into them. If you are using the dovetail mount, check out the Warne 22 rings. Very nice quality rings that are precision made, especially for dovetail.

Re: Windage adjustment error at varying ranges, no wind

Post by steven_main on Thu Jun 14, 2012 5:39 pm

Just to clarify, when I specify 6MOA left, I meant that was the adjustment I consistantly have to apply when changing ranges. The weapon ALWAYS shoot right when transitioning from 100 meter to 200 meter.

Windage adjustment error at varying ranges, no wind

Post by steven_main on Thu Jun 14, 2012 5:36 pm

So I have a Marlin .17HMR bolt action I purchased last week, couldn't ask for a more accurate weapon. I was formerly a member of a SKT (small kill team) and shot M14s outfitted with bipods, leupolds, and cheekrests. Crude but worked out to 600 yards, no problem. I missed the thrill of precision marksmanship so I bought this .17hmr, easily stacked rounds one on top of the other at 50 yards with a $25 Tasco. The tasco was crap though and also had a bent objective lense bell and required maxed out windage to put lead on steel. I bought every here's FAVORITE scope instead the BSA Sweet 17 ;-) For the money and the features it looks like it can't be beaten. HOWEVER........... I zero'd the rifle at 100 yards to a T.. Right on the money, I move back to 200 yards. This is a calm windless day. When I move to 200 yards, I adjust the paralax to appropriate setting, set the BDC to 200 and have at it...... Miss Miss Miss... all to the right. I end up dialing 6 MOA left before Im back on target, I still observe no wind at all. It becomes dark so I pack it in and repeat the next day, get back to zero on 100, go back to 200... 6MOA left... there was a <5mph wind. I reset the whole range and shoot straight into the wind back at zero windage, Still shooting 6 MOA to the right and requiring correction. Is this a scope mounting error? is this a Paralax issue? is this scope somehow defective? Im not very knowlegable about optics I just shoot what Im given but this is a first for me.

Top