2,551 Brands 452 Categories All Departments

15 moa leopold base

Post a reply


Enter the code exactly as it appears. All letters are case insensitive.
Smilies
:D :) :( :o :shock: :? 8) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :wink: :!: :?: :idea: :arrow: :| :mrgreen:
BBCode is ON
[img] is OFF
[flash] is OFF
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: 15 moa leopold base

Re: 15 moa leopold base

Post by Steven_L on Tue Jul 08, 2014 2:07 pm

Should not be happening. You have 60 MOA of adjustment above and below mechanical center. 120 minutes overall. Even with a 15 minute base you should have plenty of adjustment left. Please tell me exactly what base and rings you ordered, or your order number so I can look it up. It's unlikely the scope is faulty, but let's check your mounting solution first. Thanks for the bump.

Re: 15 moa leopold base

Post by augie240 on Mon Jul 07, 2014 8:35 pm

Bump

Re: 15 moa leopold base

Post by Steven_L on Fri Dec 28, 2012 2:37 pm

Interesting question and observations regarding your lack of elevation adjustments. Seems pretty odd. I have a question into Leupold about this, and I'll post an answer when I confirm my findings. Thanks for the patience. I know it's important and I will always try my best to answer your questions confidently.

15 moa leopold base

Post by augie240 on Fri Dec 28, 2012 9:29 am

I recently set up a Remington 700 LTR .308 with a 15 moa one piece Leopold base, Warne tactical rings and a Leopold VX 3 4.5-14 x 50mm CDS scope with a 30mm tube. The windage only needed 1.5 inches of adjustment at 100 yards but the elevation adjustment seems to have bottomed out. I've never seen this before but have never used a canted base. I'm at 2 inches high at 100yds. Normally I would be good with that but I want to order the CDS turret and read that it would be set from 100 out to @ 800 yds in 100 yd increments.
I thought with the 30mm tube I wouldn't run into this. Any suggestions on a fix besides shimming the front of the base?

Thanks

Top