2,541 Brands 452 Categories All Departments
not yet rated review & rate
Government Export Restriction Government Export Restriction
$729.99
Code: PL-HR-POWCOMP2-MT53H7B4720
MPN: MT53H7B4720
UPC: 093045930798

Peltor PowerCom PLUS II 2-Way Radio Headset Headband Product Info

Peltor PowerCom PLUS II 2-Way Radio Headsets for communication in high noise environment. The PowerCom PLUS II by Peltor can help increase productivity and improve safety. Theseimage headsets can be custom programmed from the 430-470 with PL/DPL. The earcup microphone is sure to prevent wearer isolation. This Peltor Two Way Radio has a removable and rechargeable battery included. The noise-canceling boom microphone eliminates complicated communications. The hands-free voice activated PTT is programmable with a noise reduction rating (NRR) of up to 25dB. We carry an extensive collection of Peltor Hearing Protection & Headset Accessories. For our complete selection of products by Peltor on sale please visit our Peltor page. For more Hearing Protection & Headset Accessories please visit our Hearing Protection & Headset Accessories store section.

MT53H7B4720: Peltor PowerCom PLUS II 2-Way Radio Headset Neckband Model

Specifications for Peltor PowerCom PLUS 2, Two-Way Radio Headsets:

General Specifications
Channel Capacity: 30 Channels
Weight (Without Batteries): 14 oz/400 g
Battery life LOW power @ 5/5/90: duty cycle 36 hours using 2 standard high capacity AA batteries
Battery life HI power @ 5/5/90: duty cycle 30 hours using 2 standard high capacity AA batteries
Approvals/ratings: Intrinsically Safe **
Transmitter Specifications
Frequency range: 430-470 MHz
Channel Spacing: 12.5/25 kHz
Coded Squelch Settings: 83 Digital, 38 analogue
Channel raster: 6.25/12.5/25 kHz
Freq stability: +/- 2ppm
Power: 10 mW/20 mW/200 mW
Modulation Limiting: 12.5 kHz +/- 2.5 kHz
Modulation Limiting: 25 kHz +/- 5 kHz
FM Hum & Noise: 12.5 kHz -34 dB
FM Hum & Noise: 25 kHz -40 dB
Radiated emissions: <1 GHz < 0.25 uW
Radiated emissions: 1-4 GHz < 1 uW
Adjacent channel power: 12.5 kHz -60 dBc
Adjacent channel power: 25 kHz -70 dBc
Audio response: 300-3000 Hz +/- 2 dB
Audio Distortion: 3%
FM Modulation: 16K0F3E, 8K50F3E
Receiver Specifications
Frequency range: 430-470 MHz
Channel Spacing: 12.5/25 kHz
Coded Squelch Settings: 83 Digital, 38 analogue
Channel raster: 6.25/12.5/25 kHz
Freq stability: +/- 1ppm
Sensitivity (12 dB SINAD): -122 dBm typical
Intermodulation: 70 dB
Adjacent channel selectivity: 12.5 kHz 60 dB
Adjacent channel selectivity: 25 kHz 70 dB
Spurious rejection: 70 dB
Rated audio: 10 mW
Audio distortion: 3%
Hum and noise: 12.5 kHz -35 dB
Hum and noise: 25 kHz -35 dB
Radiated spurious emission: <1 GHz < 2 nW
Radiated spurious emission: 1-4 GHz < 20 nW
**Factory Mutual (FM) Class I Groups C & D; Class II, Groups, E, F & G; Class III, Canadian Standards Association (CSA) Class I Groups A, B, C & D; Class II, Group G; Class II

Features of the Peltor Power Com PLUS II 2-Way Radio Headset

  • Compatible with existing in plant UHF 2-way radio systems
  • Custom programmable to user specifications
  • Earcup microphones pick-up warning signals and prevent “wearer isolation”
  • Removable and rechargeable battery pack included or uses 2 “AA” batteries
  • Noise canceling boom microphone
  • Programmable hands-free voice activated PTT
  • Attenuation test data conform to OSHA requirements
  • Must be programmed; some frequencies require FCC or Industry Canada license.

Package Contents:

  • Peltor PowerCom PLUS II 2-Way Radio Headset

Peltor PowerCom PLUS II 2-Way Radio Headset Headband Related Products

Peltor PowerCom PLUS II 2-Way Radio Headset Headband Unorderable Models

Peltor PowerCom PLUS II 2-Way Radio Headset Hard Hat Clip-In MT53H7P3E4720, MPN: MT53H7P3E4720, UPC: 093045930804, Code: PL-HR-POWCOMP2-MT53H7P3E4720
Peltor PowerCom PLUS II 2-Way Radio Headset Headband Model MT53H7A4720, MPN: MT53H7A4720, UPC: 093045930781, Code: PL-HR-POWCOMP2-MT53H7A4720

Peltor PowerCom PLUS II 2-Way Radio Headset Headband Comments