Product Category Description:

Circulating bath is specifically designed for coliform testing, including determination at 44.5°C as specified by APHA, AWWA, WEF, and EPA, using either the membrane filter or MPM method. The bath may be used for E. coli determination at 45.5°C as specified by the AOAC*. Bath meets the requirement for the APHA, AWWA, and WEF seven-hour fecal coliform tests at 45.5°C and for the DST* (Defined Substrate Technology) tests for E. coli and total coliforms at 35°C.

Three programmable preset temperature buttons allow quick transition between common coliform test temperatures. Bath temperature is displayed on a LED display and may be viewed in °C or °F, in increments of 0.1°. The bath features an adjustable overtemperature cutoff and a low-liquid cutoff.

Bath is equipped with a tilting, transparent polycarbonate cover that drains fluid back into the bath when opened. The integral two-speed simplex pump is switchable between 9L/min. and 15L/min. (2.4gal./min. and 4gal./min.). Pump can be used to circulate bath fluid to other instruments, such as refractometers or spectrophotometers, using a closed-loop configuration.

All wetted components are constructed of corrosion-resistant stainless steel. The outer case is protected with a durable, easy-to-clean epoxy powder coating.

CE marked. CSA certified.

Ordering Information: Supplied with a sample tray and thermometer clip. Thermometer not included.

Specifications for Polyscience Corporation Heated Circulating Water Bath and Incubator for Coliform Testing, Model 8306, PolyScience 8306A11B :

Electrical:		120V, 50/60Hz, 12A
PolyScience No.:		62970
Unit:		Each
Temperature Range:		5°C above ambient to 150°C
Temperature Stability:		±0.05°C
Reservoir Capacity:		28 L (7.4 gal.)
Dimensions, Interior:		26L x 29.8W x 20.3D cm (101/4 x 113/4 x 8")
Dimensions, Overall:		35.6L x 55.9W x 34.3D cm (14 x 22 x 131/2")
Dimensions, Shipping Weight:		22.2 kg (49 lbs.)

(Please note that the description and stock photo may not correspond to the specific model listed above)

We offer only genuine Polyscience Corporation products, authorized for sale in the U.S. and other markets, so you can be sure that you are buying authentic Baths, Ovens, Incubators, and Cryogenics Storage with a full manufacturer's warranty in addition to our own 100% Satisfaction Guarantee. We are your premier online distributor for Polyscience Corporation Baths, Ovens, Incubators, and Cryogenics Storage. We are an authorized supplier to all federal and state government agencies, as well as to research and educational institutions, and can facilitate volume orders on many types of laboratory equipment, lab consumables, and other products to help fulfill your specific needs. We offer Free Shipping and FREE USPS shipping to APO and FPO addresses on all orders in our store over $29.95. Please refer to our APO/FPO Shipping and Export Restrictions for more information on export to APO/FPO addresses.

In addition to the Polyscience Corporation Heated Circulating Water Bath and Incubator for Coliform Testing, Model 8306, PolyScience 8306A11B/ 53650-200, we carry a full complement of Baths, Ovens, Incubators, and Cryogenics Storage as well as other product offerings from Polyscience Corporation. We also carry a full line of Polyscience Corporation accessories to help meet your laboratory and scientific needs.

For a complete selection of Polyscience Corporation Baths, Ovens, Incubators, and Cryogenics Storage, please visit our Polyscience Corporation page. For more brand name Baths, Ovens, Incubators, and Cryogenics Storage please visit our Baths, Ovens, Incubators, and Cryogenics Storage store section. To see our complete line of lab, medical, industrial, and scientific products, please see our science and lab equipment online catalog.