Products
2,495 Brands 483 Categories All Departments
EGW Remington 700 Picatinny Rail Tactical Scope Mount
$39.99
Purchase
Browse by Rating
(83 reviews)
Share your Thoughts! Write a Review
Most Helpful Positive Review EGW 20 MOA S/A 700 Base
I have this product on my Remington 700 Tactical along with EGW 30mm .840 R...
Read More...
Most Helpful Negative Review lack of EGW customer servive
I have 3 EGW mounts and have no complaints about the first two I purchased....
Read More...
Sort by
Show
Page
Back
Next

EGW Remington 700 Picatinny Rail Tactical Scope Mount

by adantessr, from United States, WV Written on December 17, 2014
This item is perfect in every way. Perfect fit on my 700 BDL .270 . And it allows me to move my scope closer to my eye for perfect eye relief. . I have severe arthritis in my neck and was having problems seeing properly through my scope. No problem now. And this is a quality product for much less than others charge for similar product. Thanks Optics Planet....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

EGW Picatinny Rail for Remington 700

by RockheadGT, from United States, OH Written on December 8, 2014
This is the second one of these I have bought. Perfect fit both times. Fits and works as advertised. I have one for a Long Action, LA on my 30-06 and one Short Action, SA, on my .243 caliber. The match up to the action was perfect. I would intentionally seek EGW out again if getting another rail....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

EGW 15MOA mount

by Firehawk79, from United States, OK Written on November 26, 2014
The EGW 15MOA mount is perfect for shooters wishing to get more range and save adjustments on their scope. Even if your only shooting out to 200yrds this mount allows you to keep scope more in the middle of the adjustment range for elevation allowing more windage adjustments. The mount is machined to very tight tolerances and very straight. Setting on the receiver there was no gaps or movement therefore no additional bedding of the mount was required. Great product and as always OpticsPlanet was fast on delivery....
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you? Yes / No

perfection

by charlie, from United States, LA Written on November 21, 2014
Bought this base for a Browning A-Bolt because I had a short Leupold scope that could not span the distance for a traditional mount. Worked perfect! The gun is a 300WIN. Mag. and this base takes the licking without a hick-up. The mount also provided enough rise to mount a 40mm scope on low rings. Weaver tactical rings gave me the 6 fastener per ring hold and it ain't going nowhere. Great setup and I am completely satisfied. All for under a hundred bucks....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

Perfect fit

by Dave, from United States, SC Written on August 31, 2014
I ordered this base to mount a Trijicon scope on a customer's Remington 700 .308, it was perfect fit with no issues. The base is long enough to allow multiple mounting options for proper eye relief. Shipping was quick, I'd definitely recommend this product from OP....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

Pit Rail for Long Action Rem 700

by Cowboy, from United States, MO Written on August 12, 2014
Excellent item. Came with screws and was easy to mount. Worked outstanding with the 30mm rings for the compact scope That I needed to provide extra eye relief for. Used this to replace standard scope bases that would not work with a compact scope. Most compact scopes will not work with standard bases due to the length between the bases, especially on a long action rifle....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

Nice base!

by Legacy Reviewer, from United States, MN Written on August 30, 2013
It is not just a aluminum finish. It is also silver anodized. Nice match for matte stainless finish rifles. I wanted to polish and match my high polish receiver but the anodizing is too tough to polish off.
EGW is a great company! I called them and they offered to pull one out of the production line before the anodizing stage and sell that one to me.
Pros: Best value for a 20moa base
Cons: Could not polish, has strong anodizing finish...
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

Scope Mount Rem 700 SPS Varmint

by Legacy Reviewer, Verified Owner Written on August 2, 2013
Everything fits in perfectly on Remington 700 SPS Varmint. Fits the scope ring great.
Pros: Drop In Fit
Cons: None...
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you? Yes / No

Money well spent

by Legacy Reviewer, Verified Owner Written on July 19, 2013
Great rail, I don't think you could make one any better. Save your self $100 by getting this one. The rails is a little long I wish It was shorter.
Pros: Price
Cons: A little long...
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

lack of EGW customer servive

by Legacy Reviewer, from United States, NC Written on July 19, 2013
I have 3 EGW mounts and have no complaints about the first two I purchased. The third one was for a Rem. short action. Once I had mounted the rail and scope I tried to bore sight using my collimator and discovered my scope was not aligned with the bore. The scope was angled to the right enough that I did not have enough adjustment to center the reticle. I had used a dead-nutz mount on this rifle previously and had not encountered any such problem. I checked the holes on both the mount and the rifle and determined that the holes in the EGW mount were off center. I called EGW and spoke with a representative and was told to return the mount and he would have it checked out by the engineer. I returned the mount and waited. I sent emails and after several weeks I was assured that the mount would be sent to the engineer. Several more weeks pass and I am sending emails again. Finally I get a response that the engineer has checked out the mount, found it to be within specs and the mount will be returned to me. I mounted and checked the rail and realized that I still had the same problem. Disgusted with EGW customer service I ordered a Larue mount, mounted and bore-sighted the Larue with no problems. EGW customer service is not up to snuff. I honestly do not believe anyone "checked" out the rail I returned. The jury is out on EGW. As I mentioned in the beginning, I have two other EGW mounts and I have had no problems with them. Just beware of their lack of customer service!
Pros: none...
Read More...
Would recommend: No
2 of 2 found the following review helpful.
Was it helpful to you? Yes / No
Page
Back
Next

Comments on 83 User Reviews of EGW Remington 700 Picatinny Rail Tactical Scope Mount