You might want to put a prominent notation on your web site next to the HIVIZ sight (WAL2012).
This product cannot be installed on a Walther P22 that has a 5 inch barrel.
I can see where the sight would work fine on a Walther P22 with a 3.4 inch barrel since the sight is actually mounted onto the slide.
For the 5 inch barrel model, the sight must be mounted on the compensator.
To install the sight on the compensator the compensator must be removed from the barrel.
If you insert the sight into the hole in the top of the compensator (same place OEM sight is located) it blocks the hole made for the small set screw located on the top of the compensator.
The small set screw must be installed when the compensator is installed back onto the barrel along with the two large screws that fasten the compensator to the barrel.
I plan to post the same email on the HIVIZ web site.
Pros: Great product if it worked with 5 inch barrel
Cons: Can;t install on Walther P22 with 5 inch barrel...
Would recommend: No
9 of 9 found the following review helpful.
Was it helpful to you?
You said this review was not helpful.
Would you like to change your vote?