Products
2,495 Brands 483 Categories All Departments
Leapers UTG PRO AR Rifle-Length Free Float Handguard
$119.79 $129.97 Save $10.18
Browse by Rating
(9 reviews)
Share your Thoughts! Write a Review
Most Helpful Positive Review Put your AR on a diet!
What starts out as a very confusing installation system becomes impressive once figured out. The handguard slips back enough to cover a portion of the...
Read More...
Sort by
Page
Back
Next

A great AR add-on at a very reasonable cost

by TBlain, from United States, NC Written on December 8, 2014
I recently decided that I wanted to free-float the barrel on my AR-15 to gain accuracy and I wanted a fore-end as small in diameter as possible to accomplish that. I recently had held an AR from a friend after he had placed a Samson EVO on his and it felt great; it was smooth and very small making it a pleasure to hold but the cost of that fore-end was more than I could afford.
So I began searching for a more affordable alternative and I found it in the UTG Super Slim line of free-float fore-ends.
The UTG was easy to install, very solid once installed, it looked and felt great on my AR and at a price that was half as much as all the others I had looked at....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

UTG Handguard

by Warren Anderson, from United States, TX Written on November 6, 2014
Nice fit easy to install well made and looks good. I have 2 of thsee UTG handguards, one rifle length and one mid length.

It light weight and fits my hand very well. I really like the design, it make alignment ofor the gas tube very easy....
Pros:
  • fits well on rifle
Cons:
  • None
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you? Yes / No

excellent value

by sam, from United States, AZ Written on October 16, 2014
Great product, as usual utg has it right. Easy install, very slim, very light. Improves balance, handling and comfort. I have utg free float tube on many of my rifles and have been nothing but satisfied. I just ordered the 15" version to replace my 15" yhm free float tube....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

You will not be disappointedly

by Karn, from United States, KS Written on October 6, 2014
At first when I saw UTG, I was obviously skeptical. However, bein the price this is I couldn't just turn my nose at it.
And was I wrong...
The packaging is pretty simple, "here's a plastic box to him your rail in." Is all I really thought of.
Unboxing it I realized the rail is extremely light, probably as advertsized. I just don't have a scale, otherwise it would be posted.
I LOVE the barrel but design, it probably isn't the absolute sturdiest when compared to Noveske or Daniel Defense designs, but don't let it fool you. It IS sturdy.
The only con I would say is the installation of the barrel but. You need to pay attention to applying their proprietary wrench in the correct slot, and also make sure the wrench is fully seated.
Installing this gives it a very "clean" look. It's design "meshes" the rail and the upper receiver a true monolithic look.
An extremely comfortable rail, with a 12, 3, 6, and 9 o'clock installment position for rails. It even has laser marked T-rail positions.
All in all, give this rail and UTG PRO a chance.
For the money I think you will not be disappointed....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

Perfect Fit

by FMJ, from United States, IL Written on August 12, 2014
This was a perfect fit for my 16 barrel DPMS AR . Shipped fast and I got a good deal that's why I am returning customer. In my opion the super slim rail looks fanstic on my rifle. UTG makes some good products to upgrade your AR....
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

Best deal in free float hand guard

by Legacy Reviewer, Written on June 11, 2014
Bought this a couple of weeks ago. Received it 5 days after order.Shipped well protected, no damage whatsoever.
It's small, it's slim and it's not a quad rail, so it's very comfortable in the hand. Very nicely machined, full length top rail that aligned perfectly with my AR's top rail.
Installation was super easy. Took about 20 minutes, start to finish.
At 1/2 to 2/3 the cost of any comparable hand guard this is an unbeatable buy.
And it's made in the USA.
Pros: Everything
Cons: Nothing...
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

UTG 13" FREE FLOAT SUPER SLIP HANDGUARD

by Legacy Reviewer, Verified Owner Written on May 13, 2014
AFTER INSTALLING THE BARREL NUT A FEW TIMES TO PUT SHIMS IN TO GET A GOOD ALIGNMENT. YOU WILL NOTICE THE BARREL NUT WILL START TO WARP FROM TORQUEING DOWN THE BARREL NUT. ONCE IT WARPS THE HANDGUARD WILL HAVE A HARD TIME SLIDING OVER THE BARREL NUT. VERY LOW QUALITY MATERIAL. AND ONCE EVERYTHING IS INSTALLED YOU WILL NOTICE THE DIAMETER AND THE RADIUS IN THE FRONT OF THE HANDGUARD AND BARREL IS SLIGHTLY OFF. MEANING IF YOU APPLY LIGHT PRESSURE TO THE FRONT OF THE HANDGUAND AND THE BARREL YOU WILL NOTICE THAT IT MOVES AND THE BARREL IS NOT COMPLETELY CENTERED. THAT MEANS THE HANDGUARD IS NOT SECURELY LOCKED DOWN. THERES STILL MOVEMENT EVEN AFTER BEING TORQUED DOWN. I'VE INSTALLED MANY FREE FLOAT AND THIS ONE IS A BIG WASTE OF MONEY.YOU'LL GET WHAT YOU PAID FOR. DONT BOTHER CALLING LEAPERS AT (734) 542-1500. TALKED TO ONE GUY NAME PAUL DEWICKI AND NEVER HEARD FROM AGAIN AFTER SENDING HIM PICTURES OF THEIR PROBLEM . NO FOLLOW UP OR NOTHING. POOR CUSTOMER SERVICE. YOU'LL BE PRESSING NUMBERS ALL DAY BECAUSE NOONE PICKS UP THE PHONE THERE. FIGURED THEY MADE THIS PRODUCT IN THE U.S. SO I GAVE THEM A SHOT..BIG MISTAKE..UTG PRODUCTS ARE STILL GARBAGE.
Pros: none
Cons: WOBBLES..STILL HAVE MOVEMENT AFTER TORQUE DOWN..everything bad..bad customer support if you call LEAPERS CO. too...
Would recommend: No
0 of 1 found the following review helpful.
Was it helpful to you? Yes / No

Best slim profile handguard under $200

by Legacy Reviewer, from United States, MS Written on April 24, 2014
This handguard was very easy to install, and locks up as solid as a rock.

I have read other reviews about the included spanner wrench not being particularly well made...

Well the one that came with mine was pretty stout, and worked great. It went together without a hitch.

Just remember to install your flash hider before you lock the handguard down to the barrel nut!

I would definitely recommend this handguard.
Pros: Great value
Cons: None...
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you? Yes / No

Put your AR on a diet!

by Legacy Reviewer, from United States, WA Written on March 13, 2014
What starts out as a very confusing installation system becomes impressive once figured out. The handguard slips back enough to cover a portion of the receiver on each side and the barrel nut/mounting sleeve work out perfectly once figured out. Extremely lightweight and slender, very comfortable to grip yet there are rail mounting holes at 3, 6, and 9 o'clock with a permanent rail at 12. You WILL need a small gas block but it clears most low profile models I tried. Hesitated to buy this but I really like it. I put it on a 16" barrel carbine so there's only 3" of barrel showing. I will be getting more of these!
Pros: lightweight, small diameter, looks very cool
Cons: Installation is a little confusing at first....
Would recommend: Yes
3 of 3 found the following review helpful.
Was it helpful to you? Yes / No
Page
Back
Next

Comments on 9 User Reviews of Leapers UTG PRO AR Rifle-Length Free Float Handguard