2,536 Brands 453 Categories All Departments

Search Results for e-o tech scope 4.5-14x50ao

No results were found for your search query "e-o tech scope 4.5-14x50ao". The following are results for a similar search "e o tech scope 4 5 14x50mm"

Sort by
Best Match

Showing all 14 results.


Labconco Protector ClassMate Laboratory Hoods, Labconco 6970500 CLSMATE60"W/O FIXT/DUPLX Labconco Protector ClassMate Laboratory Hoods, Labconco 6970500 CLSMATE60"W/O FIXT/DUPLX

The glass front is 99cm (39") high, 0.6cm (1/4") thick, and at a angle. The vertical-rising ...   CLSMATE60"W/O FIXT/DUPLX Exterior Dimensions:  81.9D x 149.9H cm (321/4 x 59") ... blower from debris. The 0.6cm (1/4") thick glass sides, back, and baffle are removable for cleaning. ... ASTM-E-84, ASHRAE 110-95, ANSI Standard Z9.5, ADA, UL 3101-1. Ordering Information: Hoods require a remote ... (4') hoods are supplied with two 30W fluorescent bulbs. All 1.5m (5') and 1.8m (6') are supplied ... with forged brass valves. Three of the fixtures are plumbed with 0.6cm (1/4") copper tubing for cold ... water, air, and vacuum; the remaining fixture is plumbed with 0.6cm (1/4") brass tubing for use with gas.

$7,747.88

Labconco Protector ClassMate Laboratory Hoods, Labconco 6970600 CLSMATE72"W/O FIXTR/DUPLX Labconco Protector ClassMate Laboratory Hoods, Labconco 6970600 CLSMATE72"W/O FIXTR/DUPLX

screen below the exhaust outlet protects the remote blower from debris. The 0.6cm (1/4") thick glass ... sides, back, and baffle are removable for cleaning. The glass front is 99cm (39") high, 0.6cm (1/4 ... regulations and standards: SEFA #1, NFPA #45, ASTM-E-84, ASHRAE 110-95, ANSI Standard Z9.5, ADA, UL ... are plumbed with 0.6cm (1/4") copper tubing for cold water, air, and vacuum; the remaining fixture ... is plumbed with 0.6cm (1/4") brass tubing for use with gas. HOPEC IV hoods with fixtures also feature ... fixtures with forged brass valves. The upper right fixture is plumbed with 0.6cm (1/4") brass tubing ... for use with gas; the other three fixtures are plumbed with 0.6cm (1/4") copper tubing. The upper left...

$8,290.91

Labconco Protector ClassMate Laboratory Hoods, Labconco 6971600 Clsmt A STY72"W/O MON/FIX/DUP Labconco Protector ClassMate Laboratory Hoods, Labconco 6971600 Clsmt A STY72"W/O MON/FIX/DUP

for cleaning. The glass front is 99cm (39") high, 0.6cm (1/4") thick, and at a angle. ... the remote blower from debris. The 0.6cm (1/4") thick glass sides, back, and baffle are removable ... ASTM-E-84, ASHRAE 110-95, ANSI Standard Z9.5, ADA, UL 3101-1. Ordering Information: Hoods require ... 1.2cm (4') hoods are supplied with two 30W fluorescent bulbs. All 1.5m (5') and 1.8m (6') ... ADA-compliant with forged brass valves. Three of the fixtures are plumbed with 0.6cm (1/4") copper tubing ... for cold water, air, and vacuum; the remaining fixture is plumbed with 0.6cm (1/4") brass tubing for use ... right fixture is plumbed with 0.6cm (1/4") brass tubing for use with gas; the other three fixtures...

$10,797.58

Labconco Protector ClassMate Laboratory Hoods, Labconco 6970400 CLSMATE48"W/O FIXT/DUPLX Labconco Protector ClassMate Laboratory Hoods, Labconco 6970400 CLSMATE48"W/O FIXT/DUPLX

screen below the exhaust outlet protects the remote blower from debris. The 0.6cm (1/4") thick glass ... sides, back, and baffle are removable for cleaning. The glass front is 99cm (39") high, 0.6cm (1/4 ... regulations and standards: SEFA #1, NFPA #45, ASTM-E-84, ASHRAE 110-95, ANSI Standard Z9.5, ADA, UL ... are plumbed with 0.6cm (1/4") copper tubing for cold water, air, and vacuum; the remaining fixture ... is plumbed with 0.6cm (1/4") brass tubing for use with gas. HOPEC IV hoods with fixtures also feature ... fixtures with forged brass valves. The upper right fixture is plumbed with 0.6cm (1/4") brass tubing ... for use with gas; the other three fixtures are plumbed with 0.6cm (1/4") copper tubing. The upper left...

$6,729.70

Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-04 Hood With Explosion-Proof Blower, 1/4hp Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-04 Hood With Explosion-Proof Blower, 1/4hp

Labconco Fiberglass 30 Laboratory Hoods, Labconco Hood With Explosion-Proof Blower, 1/4 ... Fiberglass 30 Laboratory Hoods, Labconco Hood With Explosion-Proof Blower, 1/4hp 30300-04/ 82004-908 can ... of durable 4.5cm (13/4") tubular, epoxy-coated steel and support loads up to 453.6kg (1000lbs.). Glacier ... fixture kits include one remotely controlled service fixture with 0.6cm (1/4") diameter valve ... With Explosion-Proof Blower, 1/4hp: Description:  Hood with Explosion-Proof Blower, 1/4 ... hp Electrical:  115V, 60Hz External Dimensions, W x L x H, cm (in.):  76.2 x 76.5 x ... 137.2 (30 x 301/8 x 54) ShippingWeight, kg (lbs.):  58.5 (129) Labconco No.:...

$5,390.00

Labconco XPert Weigh Box, Labconco 5220320 Labconco XPert Weigh Box, Labconco 5220320

superstructure. Viewing window consists of 6.4mm (1/4") thick laminated safety glass with powder-coated steel ... with a pair of 76.2 cm (30") long, 3.8mm (5/32") thick neoprene gloves, an interior ceiling-mounted ... Airborne particulate cleanliness exceeds ISO Class 5 (FED-STD-209E Class 100/M3.5) and achieved ISO ... Class 3 (FED-STD-209E Class 1/M1.5) conditions at both minimum and maximum operational airflow volumes. ... Specifications for Labconco XPert Weigh Box, Labconco 5220320 : Electrical:  230V, 50Hz, 4 ... Dimensions, Transfer Chamber:  27.9I.D. x 30.5L cm (11 x 12") Dimensions, Interior Volume ... x 10-5 in.* Dimensions, Shipping Weight:  159 kg (350 lbs.) (Please note...

$11,112.73

Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-01 Hood With Blower, 1/3hp Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-01 Hood With Blower, 1/3hp

monitor (kits are sold separately). Base stands are constructed of durable 4.5cm (13/4") tubular, ... remotely controlled service fixture with 0.6cm (1/4") diameter valve and tubing, color-coded fixture knob, ...   Hood with Blower, 1/3hp Electrical:  230V, 50Hz External Dimensions, W x L x H, ... cm (in.):  76.2 x 76.5 x 132.1 (30 x 301/8 x 52) ShippingWeight, kg (lbs.):  55.3 ... Blower:  0.14 at 100 fpm (310 cfm) Maximum Static Pressure Loss, in. H2O, Hood with Blower: ... a flame-spread index less than 25 per ASTM E-84. All models feature a pivoting airfoil that promotes airflow. ... Hood exterior is glacier white, epoxy-coated steel. Units feature a vertical-rising, 0.5cm (3/16")...

$4,895.00

Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-00 Hood With Blower, 1/10hp Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-00 Hood With Blower, 1/10hp

airflow monitor (kits are sold separately). Base stands are constructed of durable 4.5cm (13/4") tubular, ... remotely controlled service fixture with 0.6cm (1/4") diameter valve and tubing, color-coded fixture ... 60Hz External Dimensions, W x L x H, cm (in.):  76.2 x 76.5 x 121.9 (30 x 301/8 x 48) ...   Each Maximum Static Pressure Loss, in. H2O, Hood without Blower:  0.14 at 100 fpm (310 ... a flame-spread index less than 25 per ASTM E-84. All models feature a pivoting airfoil that promotes ... airflow. Hood exterior is glacier white, epoxy-coated steel. Units feature a vertical-rising, 0.5 ... cfm) Maximum Static Pressure Loss, in. H2O, Hood with Blower:  0.12 at 100 fpm (310 cfm)...

$4,770.00

Labconco Fiberglass 30 Laboratory Hoods, Labconco 2834800 Duplex Electrical Receptacle Kits Kit Labconco Fiberglass 30 Laboratory Hoods, Labconco 2834800 Duplex Electrical Receptacle Kits Kit

separately). Base stands are constructed of durable 4.5cm (13/4") tubular, epoxy-coated steel and support ... with 0.6cm (1/4") diameter valve and tubing, color-coded fixture knob, and color-coded hose connector. ... Loss, in. H2O, Hood without Blower:  0.14 at 100 fpm (310 cfm) Maximum Static Pressure Loss, ... ASTM E-84. All models feature a pivoting airfoil that promotes airflow. Hood exterior is glacier ... white, epoxy-coated steel. Units feature a vertical-rising, 0.5cm (3/16") thick tempered safety glass ... Electrical:  115V, 20A External Dimensions, W x L x H, cm (in.):  — ... ShippingWeight, kg (lbs.):  1.8 (4) Labconco No.:  2834800 Maximum Static Pressure...

$129.99

Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-05 Hood With Explosion-Proof Blower, 1/3hp Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-05 Hood With Explosion-Proof Blower, 1/3hp

separately). Base stands are constructed of durable 4.5cm (13/4") tubular, epoxy-coated steel ... fixture with 0.6cm (1/4") diameter valve and tubing, color-coded fixture knob, and color-coded hose ... with Explosion-Proof Blower, 1/3hp Electrical:  230V, 50Hz External Dimensions, W x ... L x H, cm (in.):  76.2 x 76.5 x 137.2 (30 x 301/8 x 54) ShippingWeight, kg (lbs.): ...   58.5 (129) Labconco No.:  30300-05 Maximum Static Pressure Loss, in. H2O, Hood ... without Blower:  0.14 at 100 fpm (310 cfm) Maximum Static Pressure Loss, in. H2O, Hood ... per ASTM E-84. All models feature a pivoting airfoil that promotes airflow. Hood exterior is glacier...

$5,515.00

Labconco Fiberglass 30 Laboratory Hoods, Labconco 2834801 Duplex Electrical Receptacle Kits Kit With Integral Gfci Labconco Fiberglass 30 Laboratory Hoods, Labconco 2834801 Duplex Electrical Receptacle Kits Kit With Integral Gfci

airflow monitor (kits are sold separately). Base stands are constructed of durable 4.5cm (13/4 ... remotely controlled service fixture with 0.6cm (1/4") diameter valve and tubing, color-coded fixture ...   1.8 (4) Labconco No.:  2834801 Maximum Static Pressure Loss, in. H2O, Hood without ... Blower:  0.14 at 100 fpm (310 cfm) Maximum Static Pressure Loss, in. H2O, Hood ... a flame-spread index less than 25 per ASTM E-84. All models feature a pivoting airfoil that promotes ... airflow. Hood exterior is glacier white, epoxy-coated steel. Units feature a vertical-rising, 0.5 ... External Dimensions, W x L x H, cm (in.):  — ShippingWeight, kg (lbs.):...

$189.99

Labconco Fiberglass 30 Laboratory Hoods, Labconco 4892900 Accessory For Hoods With Explosion-Proof Blowers Explosion-Proof Light Fixture Kit Labconco Fiberglass 30 Laboratory Hoods, Labconco 4892900 Accessory For Hoods With Explosion-Proof Blowers Explosion-Proof Light Fixture Kit

and one airflow monitor (kits are sold separately). Base stands are constructed of durable 4.5 ... include one remotely controlled service fixture with 0.6cm (1/4") diameter valve and tubing, ... Dimensions, W x L x H, cm (in.):  — ShippingWeight, kg (lbs.):  5 (11) ... without Blower:  0.14 at 100 fpm (310 cfm) Maximum Static Pressure Loss, in. H2O, Hood ... baffle have a flame-spread index less than 25 per ASTM E-84. All models feature a pivoting airfoil ... a vertical-rising, 0.5cm (3/16") thick tempered safety glass sash with an epoxy-coated aluminum frame. A 17cm ... cm (13/4") tubular, epoxy-coated steel and support loads up to 453.6kg (1000lbs.). Glacier white...

$933.33

Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-02 Hood Without Blower Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-02 Hood Without Blower

(kits are sold separately). Base stands are constructed of durable 4.5cm (13/4") tubular, ... controlled service fixture with 0.6cm (1/4") diameter valve and tubing, color-coded fixture knob, ... Dimensions, W x L x H, cm (in.):  76.2 x 76.5 x 121.9 (30 x 301/8 x 48) ShippingWeight, ... Static Pressure Loss, in. H2O, Hood without Blower:  0.14 at 100 fpm (310 cfm) Maximum ... index less than 25 per ASTM E-84. All models feature a pivoting airfoil that promotes airflow. Hood ... exterior is glacier white, epoxy-coated steel. Units feature a vertical-rising, 0.5cm (3/16") thick ... Static Pressure Loss, in. H2O, Hood with Blower:  0.12 at 100 fpm (310 cfm) Maximum Static...

$4,160.00

Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-03 Hood Without Blower Labconco Fiberglass 30 Laboratory Hoods, Labconco 30300-03 Hood Without Blower

of durable 4.5cm (13/4") tubular, epoxy-coated steel and support loads up to 453.6kg (1000lbs.). ... Service fixture kits include one remotely controlled service fixture with 0.6cm (1/4") diameter valve ... Hz External Dimensions, W x L x H, cm (in.):  76.2 x 76.5 x 121.9 (30 x 301/8 x 48) ... in. H2O, Hood without Blower:  0.14 at 100 fpm (310 cfm) Maximum Static Pressure Loss, ... and pre-set baffle have a flame-spread index less than 25 per ASTM E-84. All models feature ... a vertical-rising, 0.5cm (3/16") thick tempered safety glass sash with an epoxy-coated aluminum ... Without Blower: Description:  Hood without Blower Electrical:  230V, 50...

$4,300.00

Showing all 14 results.