Search Results for laser

LaserLyte Ruger LCP Side Mount Laser Sight answers the growing demand for lasers specific to the increasingly popular conceal-carry market. The LaserLyte CK-AMF Laser runs only half the cost of a leading competitor, and fits on the side of the Ruger LCP and the Kel-Tec .380 and .32. This LaserLyte Laser Sight is easy to mount on the gun - simply push out and replace the stock pins with the included new screws. Then push the ergonomic activation button with the index finger and

LaserLyte Rear Sight Laser KAHR Arms RL-KA fits Kahr Arms pistols in 9mm, 40sw and 45acp. This LaserLyte laser sight features a ground-breaking laser design incorporated into the rear sight, with a compact size and revolutionary performance that make it the most extraordinary system LaserLyte has produced. Easy-to-install and easy-to-operate, the Laser Lite Kahr RSL offers a high-power laser with the benefit of not having to replace existing grips or internal stock parts. The activation button of the LaserLight RSL

LaserLyte Rear sight laser for Smith & Wesson M&P RL-MP comes in a compact size and delivers revolutionary performance. The laser design is incorporated into the rear sight, for easy installation. The Rear Sight Laser RL-MP by LaserLyte conveniently adds a high-power laser without having to replace grips, internal parts, or holsters. The performance of LaserLyte laser sights is second to none. The LaserLyte RLMP features an activation switch which is a strategically placed

LaserLyte Pistol Laser Trainer Minimum 2-Inch Barrel Required LT-PRO on sale and available from our online store. OpticsPlanet, Inc is an Authorized US Distributor for LaserLyte Laser Sights. Minimum 2-inch barrel required. Fits calibers: 9mm, 40s&w, .45acp, 38sp, .380 Auto, 357sig, 10mm and 45lc. Near flush fitting to muzzle design. Allows more advanced training scenarios. Hammer or striker fired laser activation for 100 milli-seconds. Patented adjustment system. Run Time: 3,000 shots. Batteries: 3 x 377.

LaserLyte Carbine Green Laser System K-15 on sale and available from our online store. OpticsPlanet, Inc is an Authorized US Distributor for LaserLyte Laser Sights. Fits all picatinny and weaver type rail systems 3 inches or longer. Kryptonyte laser module system. Military styling. Laser engraved markings. Fully adjustable. Protective adjustment turrets. Remote switch. Specifications: 3L x 2.43W x 1.37H inches. Weight: 5.4 ounces. Battery: 1 x CR-123. Run Time: approximately 1.5 hours. Switching: 3 position, off, constant on, momentary on. Switch: 10-inch length, 2-inch

LaserLyte Rear Sight Laser For Ruger SR-9 RL-SR is an innovative design for optimal performance and easy use. The Rear Sight Laser RL-SR by LaserLyte features a compact size and allows you to have a laser sight without having to replace grips, internal stock parts or holsters. The Laser Lyte RL SR has a strategically placed activation switch placed at the back of the slide that is easily activated by the thumb in a normal shooting position for left or right-handed shooters.

LaserLyte Laser Trainer .22-50 Caliber LT-1 on sale and available from our online store. OpticsPlanet, Inc is an Authorized US Distributor for LaserLyte Laser Sights. Safe and efficient, using a hammer-activated (sound activated) laser that appears on your target downrange, giving you instant results. Universal fit in all pistols (minimum 3" barrel required) and rifles. Includes four adapters from .22 to .50 caliber. Bright, 650nm laser. Includes carrying pouch, batteries, instructions and daylight laser target.

LaserLyte Laser Sight for North American Arms 22 NAA-1 lets you have the smallest laser and pistol combination in the world. The miniaturized laser sight clamps to the top of the North American Arms 22 LR and 22 MAG pistols, and provides laser accuracy. This LaserLyte laser sight adds true repeat shooting accuracy by giving a point of reference with the small red dot. This fully adjustable sighting laser , once it is sighted-in, gives you a new shooting

LaserLyte Rail Mount SubCompact Laser Sight V3 FSL-3 has been reduced to half the size of its predecessor! This red laser sight is the most state-of-the-art, smallest and versatile rail mounted laser that LaserLyte has offered to date. The LaserLight Subcompact V3 Sighting Laser needs less than 3/4-inch of Picatinny rail space to easily mount onto even the smallest firearms. Constructed of T6 aluminum for extra strength and durability, this updated LaserLyte Laser

LaserLyte Rear Sight Laser (RSL) for Ruger 10/22 rifle features a ground-breaking new laser design incorporated into the rear sight. Compact size and revolutionary performance make this laser sight the most extraordinary sighting system that LaserLyte has produced. Easy-to-install and easy-to-operate, the Laser Lyte RL1022 RSL offers a high-power red laser with the benefit of not having to replace existing grips or internal stock parts. The activation switch for this LaserLyte Laser Sight

Laserlyte Sight Mount Laser For Taurus CK-TA that fits nearly all Taurus revolvers including the Judge, CIA, Protector and Raging Bull series. The new and inventive LaserLyte Laser Sights is easily mounted underneath the rubber grip of the revolver and is the only laser system available that allows the customer to use factory or custom grips and holster the firearm. This is especially exciting for Judge owners because the Laser Sight by LaserLyte allows the user

LaserLyte Ruger/Kel-Tec 9mm Side Mount Laser Sight CK-AMF9 is a low-profile, streamlined, and user-friendly laser sight for your Ruger or Kel-Tec 9mm handgun. These efficient laser sights are simple to mount on your pistol of choice: simply replace the stock pins with the SML 's pins, mount the laser, and screw it in. Activation is as simple as a push of the ergonomic activation button, which can be accessed with your index finger. The Laser-Lyte Side Mount Laser Sight for LC9/PF9 can be programmed

LaserLyte CK-SWAT Side Mount Laser for S&W J-Frame and Taurus Revolvers finally gives your revolver a reliable laser sight that can be used with the factory gun grip. These laser sights are incredibly easy to install underneath your handgun's grip: simply choose the correct base plate, remove the gun grip , screw the sight into place, and replace the grip. Within a few minutes, you'll have a sighted, highly accurate Laser-Lyte laser sight for your revolver. The Laser-Lyte J-Frame Side Mount Laser

LaserLyte Rear Sight Laser Sight for Glock RTB-GL is a simple but highly effective laser sight for all Glock handguns. These rear-mounted laser sights are powerful and bright, with 650nm laser module that can project a beam up to 500 yards at night. Ambidextrous "press and go" activation allows you to activate the LaserLyte laser sight with either hand and keep it on without any effort, allowing you to line up targets without worrying about the sight. The LaserLyte Glock Rear

LaserLyte RTB-XD Springfield XD/XDM Rear Laser Sight is an efficient way to mount a highly accurate laser sight to your handgun without having to install new grips, hardware, or other equipment. Installing easily into the rear sight of your Springfield XD or XDM handgun , these laser sights feature an ambidextrous, "press and go" activation button that is easy to find and activate in a frenetic tactical situation, and they're programmable in either constant-on or pulse mode. LaserLyte has also installed an auto-off function in the

LaserLyte Rear Sight Laser KelTec RL-PF fits Kel-Tec model PF9 handguns. This LaserLyte Laser Sight features a ground-breaking laser design incorporated into the rear sight, with a compact size and revolutionary performance that make it the most extraordinary system LaserLyte has produced. Easy-to-install and easy-to-operate, the Laser Lite KelTech RSL offers a high-power laser with the benefit of not having to replace existing grips or internal stock parts. The ambidextrous activation switch of the LaserLight RSL

LaserLyte CK-MS Bersa .380 Side Mount Laser Sight is an intuitive to install, easy to use laser sight from the professionals at Laser-Lyte, designed to outfit your personal defense pistol with a highly accurate targeting laser. Installing snugly to the dust cover without a lengthy installation process, these laser sights emit a bright, straight 650nm laser from underneath the barrel, adding reliable accuracy to your Bersa .380 pistol . The Laser Lyte Bersa .380 Auto-Off Pistol Laser Sight is activated

LaserLyte MBS Six Pak Accessory Kit gives the shooter everything needed to sight in. The LaserLight MBS Six Pack Kit is made to work with the LaserLyte Mini Laser Bore Sight line. This Laser Sight Accessory includes a scope/gun leveler, 12-393 batteries, 12-20 shotgun adapter (works only with MBS-1), .51-.75 caliber bore adapter, extra.22-.50 caliber tool kit, daylight target and a durable polymer case to hold everything in. The polymer case also has molded locations for extra tools, including the LaserLyte .22-.50 Mini

LaserLyte Laser Training Target TLB-1 is an interactive laser trainer target that records where a laser hits the target, to save shooters time, money and ammunition. This LaserLyte Laser Sight Accessory is for use with the popular LaserLyte line of Laser Trainers including the original Laser Trainer, Laser Trainer Pro and Laser Trainer Cartridge. The Laser-Light Laser Trainer Target is ideal for novice or professional shooters and even instructors, letting you learn or

LaserLyte Rear Sight Installation Tool RSL RL-TOOL is an ingenious system that easily removes the rear sight from the dovetail of most semi-auto pistols. This LaserLyte Sight Tool makes installation of the LaserLyte Rear Sight effortless. The LaserLite RSL Installation Tool is perfect for gunsmiths or gunsmith-minded people. This laser sight accessory from LaserLyte smoothly drifts the sight in or out - no tapping or banging required. The LaserLite RS Installation Tool is a great