EAGTAC P Series P100C2 LED Flashlight P100C2-XPG2-BASE-NW

EAGTAC adopts current regulated high efficiency circuit to manage current that goes through the LED.

Maximum 8+ hours runtime

P100C2 runs for 15 (and up) hours on its general brightness level. The current regulated and non-PWM dimming circuit design allows constant and non-flashing output throughout its runtime for all output levels.

At turbo mode (highest brightness level), P100C2 current regulates for 1.7 hours using two EAGTAC CR123A batteries.

C1200 DS circuit

We use current regulation method to control the amount of current going through the LED for all output levels. This results in constant brightness output regardless of battery type, LED model, and temperature/voltage change.

Green design

We only use RoHS compliant and lead-free components to build our circuits and products.

We also work hard to offer environmentally friendly green packaging (such as smaller package for lower transit cost, recyclable PET label/container, and eco-friendly cardboard outer package).

High lumen output

LED lumen

XP-G2 S2: 470/60

XP-G S2: 425/60

XP-E R3: 304/50

ANSI FL-1 lumen

XP-G2 S2: 336/50

XP-G S2: 305/50

XP-E R3: 241/40

ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTACs ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.

CREE XP-G S2 LED

Cool White output

This gives you the maximum brightness output in its class. Our XP-G2 S2 LED offers 470 LED lumen at turbo mode with ultra-high efficiency 160 lumen/watt (at general mode).

Neutral White output

If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index) compared to cool white LED. Neutral white LED renders color like the sun in the afternoon. Neutral white LED is approximately 7% dimmer than our top binned cool white LED, but it's well worth the ability to see the real color of your surrounding.

Color tint selection

Cool White LED

This allows you to view the object with maximum brightness output and gives you maximum beam distance.

Neutral White LED

This gives you better color rendition and more accurate color relative to cool white LED.

Beam distance

The P100C2 reflector design allows you to view object up to - yards/- meters at turbo output with XP-E R3 LED. The XP-G2 S2 LED verion offers - yards/- meters beam distance.

Reflector

P100C2 uses polished aluminum reflector with super low textured reflector for maximum output and a pleasing beam.

Features of Eagtac P Series P100C2 LED Flashlight:

• Tactical forward clicky switch + head twisty
• Easy and Trusty operation
• Slighly press the tailcap button for momentary on/off
• Turn the flashlight by pressing the tailcap button until it clicks
• Click again to turn it off.
• Hold the body and tighten the head to enable turbo output
• Loosen the head to enable general output mode
• You can pre-select output setting before turning on.
• Gorgeous Knurling.
• Supreme handling.
• The CNC precisely cut and rolled knurling provides a sure grip throughout the entire flashlight body.
• Reverse polarity protection
• Your safety is our first priority
• Inserting battery in the wrong direction may lead to serious damage to the flashlight and the battery
• We incorporate a physical structure to protect against reverse polarity without compromise (battery with a protruding button top is required).
• Smart head design.
• Excellent thermal path
• The one piece LED module and custom LED star board with highly thermal conductive isolation layer allow the LED to dissipate heat quickly to the outside world
• This result in higher output and longer LED life (LED dims as junction temperature increases).
• Durable structure against drop impact
• The thick bezel provides highly drop resistance and make it easier to shatter window as needed
• O-ring is used as cushion to protect and waterseal the harden waterwhite glass lens (with both sided anti-reflective)
• Tail-stand ability.
• Light candle.
• Optional tail-stand rubber allows the flashlight on any flat surface to light up the surrounding.
• Included Accessories:
• Lanyard ring attachment ring

Package Contents:

• EAGTAC P Series P100C2 LED Flashlight