It is an adjustable stock that uses a roll pin to prevent adjustment after installing for certain state compliances.
It can operate as an adjustable stock as long as you don't install the roll pin.
The Mission First Tactical Restricted State Compliant Buttstock is compatible with the VISM VG094 Shotgun Pistol Grip Stock Tube Adapter. You will need to use one of the Commercial spec models MPN:BMSRSC (Black) or MPN:BMSRSC-SDE (FDE).
The Mission First Tactical Restricted State Compliant Buttstock comes with a roll pin that can be installed once proper fitment is determined. This roll pin will prevent the stock from being adjusted. If the roll pin is not installed the Mission First Tactical Restricted State Compliant Buttstock can be adjusted.
Yes, the Mission First Tactical Restricted State Compliant Buttstock will fit a Carbine length buffer tube. You will need to select a model based on what type of buffer tube you have, either a Mil-Spec buffer tube or commercial buffer tube.
The Mission First Tactical Restricted State Compliant Buttstock does not accept QD's for slings. It only has the option to wrap a sling through the cut on the rear of the buttstock.
There is not a set screw in the top of the adjustment pin on this Mission First Tactical Restricted State Compliant Buttstock.
You would need to check with local/state/federal laws to see if that is allowed. Mil-spec/Commercial refers to the tube diameter, Mil: 1.148", Com: 1.168". Stock must match one of those to fit.
Yes, it should.
You would only need to remove the roll pin to do so.