Forward Controls Design Lever V2 Enhanced Magazine Release Up to $3.50 Off w/ Free S&H — 2 models

EMR-A V2 is an ambidextrous magazine release for .223 AR receivers. EMR-A is an ergonomic ambidextrous magazine release. The lever closely mirrors the magazine release button on the right side. The portion immediately below the bolt catch's lower paddle has a lower profile to avoid interference, heretofore a common drawback of popular ambidextrous mag catches, it is also left smooth. The serrated length of the lever is split into a shallow V shaped serrations (80%) that conform to the curvature of the user's finger, and straight serrations (20%) that form a natural index point, and provide additional traction.

A 10.9lb rated magazine catch spring is included with each EMR-A. We've long considered the standard magazine catch spring to be rather weak (rated at 8.3lb), accidental / unintended mag drops can take place if a user slings his weapon, and has gear and pouches on the vest. A stiffer mag catch spring mitigates these risks, thus it is an integral part in the EMR-A package.

EMR-A's catch is made from CNC machined 4140 steel and black nitride coated, its lever is 7075 aluminum and Type 3 hard coat anodized. The roll pin has a shear strength of 800lbs.

The LP (low profile) mag catch shaft reduces the mag catch shaft length by a full revolution, or 0.03. The LP option on the EMR-A reduces the installed height of the right hand mag release button, resulting in a right side mag release button that sits below the mag release fence. This is our latest step to mitigate accidental / unintended mag drop risks.

The LP on the EMR-A will not reduce the EMR-HC's installed height on an AR15/M16 to the point where EMR-HC doesn't constitute accidental / unintended mag drop risks. The LP option's shorter mag catch shaft aims to reduce the installed height of a TDP spec mag release button (such as our EMR-H), it isn't a solution for extended mag releases, the installed height of which would require a drastically shorter shaft to offset.

Specifications for Forward Controls Design Lever V2 Enhanced Magazine Release:

Package Contents:

• Forward Controls Design Lever V2 Enhanced Magazine Release