Parker 61CA-10 PARKER 61Ca 10 Compress Align Brass Nut And Sleeve Assembly 5/8" Tube

The Parker Compress-Align Compression Fittings - Tube are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly. The Compress-Align fittings can be used in many areas where flare fittings are used due to the higher pressure rating. Compress-Align bodies are interchangeable with standard compression bodies so inventory is decreased. These economical fittings can be used in many areas where flare fittings are used due to the higher pressure rating. The design of the sleeve aligns to seal even out-of round tubing. The captive sleeve gives a visible inspection before and after installation and the design of the sleeve aligns to seal even out-of round tubing. The Compress-Align bodies are interchangeable with standard compression bodies so inventory is decreased. Use with copper, aluminum and the following Parker Parflex Division tubing: Polyethylene, Nylon, Polypropylene, PTFE, FEP, PA, and PFA. The PTFE, FEP, PA, and PFA tubing can be used in many areas where flare fittings are used due to the higher pressure rating. The design of the sleeve aligns to seal even out-of round tubing. Compress-Align bodies are interchangeable with standard compression bodies so inventory is decreased.

Features of Parker 61CA-10 PARKER 61Ca 10 Compress Align Brass Nut And Sleeve Assembly 5/8" Tube

• Brass Nut and Sleeve Assembly, Style: Tube, Connection 1 Tube O.D.: 5/8", Body Material: Brass, Maximum Operating Pressure: 2800 PSI (193 Bar)

Package Contents:

• Parker 61CA-10 PARKER 61Ca 10 Compress Align Brass Nut And Sleeve Assembly 5/8" Tube