Reviews & Ratings for FRT Triggers FRT-15L3 AR-15 Forced Reset Trigger, 3 Position, Drop-In Compatible w/Ambidextrous Safety Selector and Anti-Walk Pins — 13 reviews — Page 1

To start, this trigger will not work without a heavy buffer. Full stop. Get an adjustable buffer and put 5oz or more in it. Secondly, the fitment of the trigger and safety is sloppy and loose. Needs locktite to prevent itself from wiggling screws loose. Still iffy if this is worth it for the price tag…

HK MR556 BCG is about 3 mm to short so won’t work with it, so put it on my DD mark18 that BCG was about 1 mm to big but was all to push the back mechanism forward to activate the trigger. So just a heads up to future buyers you might have issues with it. Don’t know if it was a manufacturing error trying to get product out due to a large amount of back orders, I know I waited 3-4 months for this.

I have to say I was a bit skeptical when I bought this trigger. For one it is very expensive and two I thought I was getting another binary trigger set-up. Oh, how wrong I was. It is nothing like a binary trigger, in the third position the sear lightly pushes your finger forward and resets the sear/fires the round. It will continue to do this until you let off the trigger, hold the trigger back too hard or run out of ammo. I was having light primer strikes at first but read on the internet that running an H3 buffer will help. That did the trick, 2-3 round bursts, mag dumps, it does it all now, very happy with my purchase!

I ordered mines and waited a long time for this and can’t wait to to have it in my builds and that it will make sure your follow up shots and much more accurate and keep those groups good and much more. I highly recommend please! Plus have fun be safe and always stay prepared

Trigger was easy to install and works flawless as described. Glad I ordered the three position instead of the 2. Would be nice if it was a little cheaper but going to order more

Thing dose exactly what you think it dose and dose it well go heavier with buffer springs youl have light primer strikes otherwise

The trigger is an outstanding product for the law-abiding citizen. The pull weight was around 4.5-5.5 lbs with the slightest reset travel around1-2mm. The only drawback for the frt-15 L3 is the price of around $700 at this current time. If you really really want one, go ahead and grab one, but if you think it's not an important accessory, I'd recommend waiting for either the price to drop a good bit or someone else comes out with the something similar. I would rate this higher if it wasn't for the price bc it almost feels as if someone is trying to keep this out of the common mans hands.

The trigger was simple and straight forward to install I mean it's a drop in it should be. The only issue is with fully seating the upper and lower together there's a certain order of operations to it and I had to actually actively follow a video on yt from deskpop to get my upper to fully seat nothing major probably something u can figure out and get down after doing it a few times. Mine came totally gobbed with grease on the inside just a massive spoon full that I just spread around with a swab. There's also been reports of some internal screws walking ir coming loose so I recommend checking the trigger pack itself over before fully installing the trigger and loctite anything that seems loose. Would also like to point out some people recommend swapping up to an h2 buffer weight to help reliability currently only about 20 to 30 more dollars to the overall price if you don't already have one installed. Would recommend for anybody with an ar15 trigger compatible firearm.

At first I could not get the forced reset to work with an armaspec h3 captured buffer so I swapped it for a super 42 spring with an h3 buffer and lubed the daylights out of the trigger group and bcg. It now has 60 rounds through the forced reset supersonic suppressed and unsuppressed flawlessly. Very happy with this frt. I’ll update this review if I have any issues running sub-sonic ammo.

It took a little time to receive my new trigger. When my trigger arrived, it was packaged very basic. I unpacked the unit to prep for the intall. The install was super simple and straight forward,anyone with basic Ar15 knowledge can install this in minutes. I took it to the range where the trigger performed flawlessly. I would highly recommend this trigger.