Area 419 Zero M Sizing Dies w/Zero Shell Holder Up to $49.99 Off w/ Free S&H — 4 models

This is a 1-1/4'' die, and requires a Hybrid or 1-1/4'' Turret on your ZERO (or other press). It CANNOT be used with a 7/8'' Turret or other 7/8'' press.-IMPORTANT NOTE THESE DIES ARE NOT COMPATIBLE WITH STANDARD SHELLHOLDERS, AND REQUIRE A LARGER DIAMETER SHELLHOLDER RIM. IF YOU DO NOT HAVE A ZERO M-SERIES SHELLHOLDER, YOU CANNOT USE THIS DIE. TO ORDER ONE FOR YOUR ZERO OR TRADITIONAL RAM-STYLE PRESS, CLICK HEREThe ZERO M-Series Sizing die is the culmination of years of testing, research, trial, error, frustration, and finally, discoveries.As Reloaders, we knew we needed a die to do certain things, but as the makers of the ZERO Reloading Press, we also learned a huge amount about what other dies did well or did poorly, and what our customers were struggling with on a daily basis.With the ZERO M-Series Sizing Die, we think we have produced a sizing die that is capable of producing the finest, match-grade ammunition, as well as being user-friendly to new and learning reloaders.-Sizing brass doesnt have to be complicated. It doesnt have to require years of trial and error. It just needs equipment, made with the end-user in mind, designed with the understanding that a die is part of an ecosystem of parts. A press, a die, the brass, the rifle they all have to work together and be designed with one another in mind. This is that. Introducing, the ZERO M-Series Sizing Die.

Specifications for Area 419 Zero M Sizing Dies w/Zero Shell Holder:

Features of Area 419 Zero M Sizing Dies w/Zero Shell Holder

• This product listing is for a Billet storage block ONLY, for your 419 Funnel and heads. See either the ''Reloader Kit'' which includes six heads, ''Master Kit'' which includes six heads, a handle, and a storage block. Or finally the ''Ultimate Kit'' which includes the entire ''Master Kit'' PLUS a 50 place cartridge reloading block engraved with your choice of caliber.Machined in house from a solid billet of 6061-T6 aluminum, every single surface of the block is machined.Holds the funnel with or without a head attached as well as 10 spots for heads or drop tubes to be storedFront six head storage locations are engraved for standard calibers.Rubber feet on the bottom keep from sliding around on your bench.

Package Contents:

• Area 419 Zero M Sizing Dies w/Zero Shell Holder