Bravo Company Mfg Bcmgunfighter Ar-15 Enhanced Lower Parts Kit

Bcm® Enhanced Lower Parts Kit For Your Ar15 Lower Receiver

This Kit Includes All The Mil-spec Quality Components You Have Come To Expect From Bcm, Along With Some Fantastic Upgrades To Include;

• Bcm Pnt™ Trigger Assembly

• Bcm Pistol Grip, Mod 3

• Bcm Enhanced Trigger Guard

In A Commercial Market Flooded With Imported And Low Quality Mil-spec Imitations, You Can Trust That Bcm Parts Are made in specialized factories And To The Highest Standards. Please Look At The Information Below.

Bcm Pnt™ Trigger Assembly (polished - Nickel - Teflon)

Bcm Quality, Modern Manufacturing Processes, And Aerospace Coatings Are Combined To Ensure Parts Last A Lifetime While Performing Far Beyond Requirements Established Nearly Six Decades Ago.

The Bcm Pnt™ Trigger And Pnt™ Hammer Are A Precision Machined Mil-spec Aisi8620 Investment Casting Per The Usgi Tdp (mil-spec) For M16/m4 Family Of Weapons. (not To Be Confused With Mim Parts That Are Very Common In The Commercial Market). 156/157 Holes Are Honed To Assist In Perfect Alignment And A Smooth Trigger Pull.

After That, The Bcm Pnt™ Trigger And Pnt™ Hammer Then Goes Through A 3 Step Heat Treat And Case Hardening Process For Optimal Grain Structure Alignment, Yielding A Stronger And More Wear Resistance Product..

Polished

The Sear Engagement Surfaces Are Ground, But Then Hand Polished Well Beyond The Mil-spec 32 Rms Surface Finish. These Contact Surfaces Are Micro Polished By Hand For A 10-15 Rms!

Nickel

An Electroless Nickel Finish Is Applied For A Smoother Trigger Pull With Less 'grit' And Reduced Felt 'creep'. Nickel Also Provides A Long Lasting Finish That Will Not Corrode, Rust, Or Discolor Due To Oxidation.

teflon

Teflon Particles Are Embedded In The Nickel, Further Reducing The Friction Of The Interface And Ensuring A Long Lasting Coating. This Is Done On Both The Bcm Pnt™ Trigger And Hammer In Order To Provide The Maximum Benefit Allowed By The Nickel Coating, By Augmenting The Low Friction And Corrosion Resistance.

This Assembly Includes Our Impact Resistant Trigger And Hammer Pins. They Are Centerless Ground To A Fine Finish And Superior Tolerances To Ensure Compatibility With All Mil Spec Lower Receivers Built Per The Usgi Tdp.

The Bcm Disconnector Is Stamped From A 1070 Material And Fine Blanked For Cleaner Edges, Double Disc Ground To Precise Size. All Hammer Engagement Surfaces Are Also Ground For A Super Clean Reset.

The Processes And Tolerances Are Matched In The Bcm Pnt™ Trigger Assembly To Create A System Better Than The Sum Of Its Parts.

Bolt Catch And Safety Selector

The Bcm Bolt Catch And Safety Selector Are A Mil-spec Aisi8620 Investment Casting Per The Usgi Tdp For M16/m4 Family Of Weapons. (not To Be Confused With Mim Parts That Are Very Common In The Commercial Market)

The Safety Selector Is Center-less Ground. The Selector And Bolt Catch Are Machined To The Mil-spec , Then Goes Through A 3 Step Heat Treat And Case Hardening Process For Optimal Grain Structure And Wear Resistance. Has A Phosphate Finish For Corrosion Resistance.

Bcm Magazine Catch

The Bcm Magazine Catch Assembly (plate And The Post) Is Precision Machined Mil-spec Aisi8620 Per The Usgi Tdp For M16/m4 Family Of Weapons. (not To Be Confused With Mim Parts That Are Very Common In The Commercial Market) And A Hardened Alloy Stee

Specifications for Bravo Company Mfg Bcmgunfighter™ Ar-15 Enhanced Lower Parts Kit:

Package Contents:

• Bravo Company Mfg Bcmgunfighter™ Ar-15 Enhanced Lower Parts Kit

The Bravo Company Mfg Bcmgunfighter™ Ar-15 Enhanced Lower Parts Kit is a quality addition to the Bravo Company MFG lineup. For more great deals on AR15 Lower Parts by Bravo Company MFG, please browse our Bravo Company Mfg Gun Parts page.