DNZ Products Game Reaper Scope Mount - Browning Up to 23% Off w/ Free Shipping — 4 models

Browning A Bolt and A Bolt II mounts: Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both screws use 7/64 Allen wrench. Super Short action Outside to outside of rings is 3.84. Standard rings have 2 screws per ring and rings are .63 wide. 4 Hole to hole spacing dimensions are .86, 3.02, .56. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Fits right hand firearms. Short action Outside to outside of rings is 3.84. Standard rings have 2 screws per ring and rings are .63 wide. Tactical rings have 4 screws per ring and are .80 wide. 4 Hole to hole spacing dimensions are .86, 3.11, .86. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Fits both left and right hand firearms. Long action Outside to outside of rings is 4.60. Standard rings have 2 screws per ring and rings are .63 wide. Tactical rings have 4 screws per ring and are .80 wide. 4 Hole to hole spacing dimensions are .86, 3.87, .86. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Fits both left and right hand firearms.

Browning A Bolt Mountain TI: Base screws are 6-48 X 1/4 long and ring screws are 6-40 X 5/8 long. Both use 7/64 Allen wrench. Outside to outside of rings is 3.84. Rings are .63 wide. 4 Hole to hole spacing dimensions are .86, 3.11, .86. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Receiver is not the same height on front and back. Fits right hand firearms.

Browning A Bolt 12 gauge slug gun: Base screws are 6-48 X 1/4 long and ring screws are 6-40 X 5/8 long. Both use 7/64 Allen wrench. Outside to outside of rings is 4.46. Rings are .63 wide. 4 Hole to hole spacing dimensions are .86, 3.86, .86. Height of mount from top of receiver to centerline of scope tube is low .98. Receiver is not same height on front and back. Mount fits right hand firearms.

Browning A Bolt 3: Base screws are 8-40 X 1/4 long and ring screws are 6-40 X 5/8 long. Base screws use a 9/64 Allen wrench and ring screws use a 7/64 Allen wrench. Long action Outside to outside of rings is 4.61. Rings are .63 wide. 4 Hole to hole spacing dimensions are .86, 3.86, .86. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Mount fits both left and right hand firearms.

Browning BAR and Long action BLR: All BAR actions use the same mount. This mount also fits the long action BLR. Base screws are 6-48 X 1/4 long and ring screws are 6-40 X 5/8. Both use 7/64 Allen wrench. Outside to outside of rings is 4.24. Rings are .63 wide. 4 Hole to hole spacing dimensions are .50, 3.19, .50. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Mount fits both left and right hand firearms. Same mount used on a Benelli R1 rifle.

Browning BLR short action: Base screws are 6-48 X 1/4 long and ring screws are 6-40 X 5/8 long. Both use 7/64 Allen wrench. Outside to outside of rings is 4.29. Rings are .63 wide. 4 Hole to hole spacing dimensions are .50, 2.81, .50. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Mount fits both left and right hand firearms.

Browning T Bolt: Base screws are 6-48 X 1/4 long and ring screws are 6-40 X 5/8 long. Both use 7/64 Allen wrench. Outside to outside of rings is 4.29. Rings are .63 wide. 4 Hole to hole spacing dimensions are .50, 2.87, .50. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Mount fits both left and right hand firearms.

Browning Shotgun: Base screws are 8-40 X 1/4 long and ring screws are 6-40 X 5/8 long. Base screws use 9/64 Allen wrench and rings use 7/64 Allen wrench. Outside to outside of rings is 4.29. Rings are .63 wide. 3 Hole to hole spacing dimensions are 1.90, 1.60. Height of mount from top of receiver to centerline of scope tube is low .94. Mount fits both left and right hand firearms.

Browning X Bolt: Base screws are 6-48 X 1/4 long. Ring screws are 6-40 X 5/8 long. Both screws use 7/64 Allen wrench. Super Short action Outside to outside of rings is 3.79. Rings are .63 wide. 4 Hole to hole spacing dimensions are .70, 2.82, .70. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Mount fits right hand firearms. Short action Outside to outside of rings is 3.91. Standard rings have 2 screws per ring and rings are .63 wide. Tactical rings have 4 screws per ring and are .80 wide. 4 Hole to hole spacing dimensions are .70, 2.94, .70. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Mount fits right hand firearms. Long action Outside to outside of rings is 4.58. Standard rings have 2 screws per ring and rings are .63 wide. Tactical rings have 4 screws per ring and are .80 wide. 4 Hole to hole spacing dimensions are .70, 3.69, .70. Height of mounts from top of receiver to centerline of scope tube is low .94, medium 1.06, and high 1.19. Mount fits right hand firearms.

Specifications for DNZ Products Game Reaper Scope Mount - Browning:

Features of DNZ Products Game Reaper Scope Mount - Browning:

• Precision machined from a solid block of top-grade billet 6061T6 aluminum
• Custom made to fit each type of firearm and align perfectly with your rifle receiver
• No moving parts between the firearm and the scope
• 67% lighter than comparable one-piece mounts with four times the threads and precision socket-head cap screws for absolute strength and security
• Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight

Package Contents:

• DNZ Products Game Reaper Scope Mount - Browning

This product is compatible with the following gun models: Browning A-Bolt III