Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Colt Gold Cup, Python, Anaconda 49421 Red Dot Sights-Footprint: Deltapoint Pro, 10% Off

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

Modification of your firearm may nullify the manufacturer's warranty.

This product should be installed and checked by a qualified gunsmith.

No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

This Mount Fits:

• Colt Gold Cup
• Colt Trooper Mark 3
• Colt Python
• Colt Anaconda*

This is for Colt models with the Elliason style adjustable rear sight.

The elevation screw from the original rear sight is re-used in the center hole on this mount unless you have an Anaconda. An extra screw is available for purchase.

*Anacondas require a new elevation screw due to the design of the elevation screw supplied with the gun.

NOTE: For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.

Installation Instructions:

• Remove the rear sight
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite to the provided mounting screws
• Torque mounting screws to 15in/lbs

Specifications for Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Colt Gold Cup, Python, Anaconda:

Features of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Colt Gold Cup, Python, Anaconda:

• Fit Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount)

Package Contents:

• Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Colt Gold Cup, Python, Anaconda