Tap Tap to Zoom
Show with deals only:
Code: 2VP-HZ-AR10HG-GGP-308-15-HG-OD
MPN: GGP-308-15-HG-OD
UPC: 860006002060
Code: 2VP-HZ-AR10HG-GGP-308-15-HG-SG
MPN: GGP-308-15-HG-SG
UPC: 860006002053
Code: 2VP-HZ-AR10HG-GGP-308-18-HG-OD
MPN: GGP-308-18-HG-OD
UPC: 860006002091
Code: 2VP-HZ-AR10HG-GGP-308-18-HG
MPN: GGP-308-18-HG
UPC: 856054008772
Code: 2VP-HZ-AR10HG-GGP-308-18-HG-FDE
MPN: GGP-308-18-HG-FDE
UPC: 850048947337
Code: 2VP-HZ-AR10HG-GGP-308-15-HG-FDE
MPN: GGP-308-15-HG-FDE
UPC: 860006002077
Code: 2VP-HZ-AR10HG-GGP-308-18-HG-SG
MPN: GGP-308-18-HG-SG
UPC: 860006002084
Buy Together and Save
Behold, our tried and true handguard design that comes standard on all GGP MKII rifles is available for the builders out there. GGP AR-10 handguards are extruded from 6061-T6 Aircraft Grade Aluminum, finished with True Black Type III Class 2 Hard Coat Anodizing and are available in 15in and 18in lengths. The inside diameter is 1.380in and uses a non-proprietary barrel nut that does not require timing. Simply tighten the barrel nut to 65 ft lbs, slide the handguard over until it is flush with upper receiver. Left and Right side index tabs ensure the handguard does not twist under use. Lastly use the two provided fastening screws to tighten the handguard around the barrel nut, at an approximate torque spec of 35 in lbs.
Manufacturer: | Grey Ghost Precision |
Finish: | Type III Class 2 Hard-Coat Anodized |
Fabric/Material: | 6061-T6 Aircraft Grade Aluminum, Aluminum |
Gun Make: | AR Platform |
Gun Model: | AR-10 |
Gun Type: | Rifle |
Gun Rail: | Picatinny |
Condition: | New |
Inner Diameter: | 1.38 in |
Mount Type: | M-LOK |
Quantity: | 1 |