MDT LSS-22 Chassis System for Anshutz Match 54

Our LSS-22 chassis system for .22LR caliber rifles is lightweight and compact, and adopts the same footprint as the LSS. You will notice a significant improvement in accuracy due to the V-shaped bedding and free floated forend, which allows for barrel contours up to 1" in diameter.

The chassis system is manufactured out of billet 6061-T6 aluminum, and has been finished with Cerakote in Black or Flat Dark Earth (FDE).

To keep this chassis system compact, we have designed it to take carbine AR-15 buttstocks. Fixed buttstocks can also be mounted with the use of a fixed stock adapter.

The LSS-22 uses the factory magazine, and each chassis is compatible with all factory barrel contours.

Because we have lowered the buttstock interface, The Savage Mark II, CZ 455 and Ruger American can use iron sights with this chassis. If you are using a scope, we recommend a stock with a cheek riser.

COMPATIBILITY

The MDT LSS-22 chassis system is currently manufactured for the following bolt action rifle platforms:

Ruger American

CZ 455

CZ 452

Browning T-Bolt

Savage Mark II - compatible with 93R17

Anschutz Match 54 - compatible only with models 1710 and 1712

Anschutz Match 64 - compatible only with models 1416 and 1417

The LSS-22 now also fits 17 HMR or 22 WMR versions with the exception of the CZ452 and Anschutz Match 64.

IMPORTANT NOTES

The Ruger American requires the two OEM fixing components in addition to the magazine

The Browning T-Bolt requires the OEM magazine holder in addition to the magazine

The Savage Mark II, CZ 455 and Ruger American can use iron sights.

The CZ455 will work with Timney and FlyWeight triggers.

MOUNTING AND COMPATIBLE ACCESSORIES

The LSS-22 chassis is designed to accept any AR-15 carbine buttstock and pistol grip (purchased separately), and allows for customization with a wide variety of accessories.

Mounting holes are spaced for Magpul style L5 (11 slots), and L3 (7 slots) rails (1.600 / 3.200) to be used on the bottom of the forend and are compatible with our Aluminium Picatinny Rails with Flush Cup Sling Mounts.

SPECIFICATIONS

Up to 21% increase in accuracy

CNC Machined from 6061 aluminum

Cerakote Finish (in Black or Flat Dark Earth)

Hole spacing for Magpul L5 (11 slots) and L3 (7 slots) rails

Designed for carbine AR-15 buttstocks

Accepts AR-15 pistol grips

Lightweight, free-floating modular forend

Accommodates barrels up to 1" diameter.

Length of pull of 11.5-14.75 (based on Hogue stock)

Compatible with OEM Magazines

Weight: 1.6lb - 1.8lb

WHAT YOU GET, AND WHAT YOU NEED

The LSS-22 Chassis System comes as a 1-piece chassis, with all required mounting hardware included. This includes new action screws and a screw for the pistol grip.

To install this chassis on your rifle, here are some additional items you will need to purchase:

Any AR-15 buttstock or our Skeleton Carbine Stock. For fixed buttstocks, you will need the fixed stock adapter.

A buffer tube for your buttstock (both mil-spec and commercial work with our chassis)

An AR-15 pistol grip. Ideally without a beavertail, or with a soft (bendable) beavertail

Your original factory magazine

Features of MDT LSS-22 Chassis System for Anshutz Match 54:

• Up to 21% increase in accuracy
• CNC Machined from 6061 aluminum
• Cerakote Finish (in Black or Flat Dark Earth)
• Hole spacing for Magpul L5 (11 slots) and L3 (7 slots) rails
• Designed for carbine AR-15 buttstocks
• Accepts AR-15 pistol grips
• Lightweight
• free-floating modular forend
• Accommodates barrels up to 1" diameter.
• Length of pull of 11.5-14.75 (based on Hogue stock)
• Compatible with OEM Magazines

Package Contents:

• MDT LSS-22 Chassis System for Anshutz Match 54