Octopus Autopilot Drives Hydraulic Gear Pump 12V 6-9CI Cylinder OCTAFG0612 Color: Black, 20% Off w/ Free S&H

Prepare your vessel for more precise and efficient navigation with an Octopus Hydraulic Gear Pump. With an average current draw of 3.8A, these GPS Accessories from the experts at Octopus Autopilot Drives deliver high-performance flow rates for your helm and steering mechanisms. This Octopus Autopilot Hydraulic Gear Pump is built with a small footprint, allowing you to place it nearly anywhere onboard without fear of causing clutter or taking up too much space. You'll experience lower noise and vibrations which makes the sailboat more suitable for installation. Every aspect of the Octopus Autopilot 12V/24V Hydraulic Gear Pump is optimized to ensure your journeys are easy and successful.

Specifications for Octopus Autopilot Drives Hydraulic Gear Pump 12V 6-9CI Cylinder:

Features of Octopus Autopilot Drives Hydraulic Gear Pump 12V 6-9CI Cylinder

• Industry leading efficiency - lower power consumption particularly under demanding conditions requiring higher flow rates equates to a major advantage over competing units.
• Cost saving - the increased efficiency and performance means the pumps can be used with smaller autopilot course computers than equivalent drive units.
• The smaller footprint of the compact gear pump increases installation flexibility.
• Lower noise and vibration make the gear pump particularly suitable for sailboat installations.
• Suitable for balanced or unbalanced cylinders.
• All models available for both 12v and 24v systems.
• :
• Flow Rate: 600CC/min
• Voltage: 12 Volt
• Cylinder Range: 6-9ci CYLINDER
• Average Current Draw: 3.8A
• Operating Temperature: -15 to +75'C (5 - 167'F)
• Waterproofing: IP55
• Ignition Protection: ISO 8846 & SAEJ1171
• EMC Compliance: EN60945-9-2002

Package Contents:

• Octopus Autopilot Drives Hydraulic Gear Pump 12V 6-9CI Cylinder