Tap Tap to Zoom
- Magnification:
- 2.1 x
- Resolution:
- 384x288 pixels
- Battery Type:
- AA
- Exit Pupil:
- 8 mm
- Range of Detection:
- 900 - 985 m
- Battery Quantity:
- 4
- Magnification Type:
- Fixed
Code: ZA-THM-SJS84T-PL77310
MPN: PL77310
UPC: 744105207284
Product Info for Pulsar Quantum 19 Thermal Imaging Scope
Acquire the best possible images in specific viewing conditions with the Pulsar Quantum 19 Thermal Imaging Scope for a successful hunt. This thermal imager by the experts at Pulsar features a body of fiberglass and reinforced plastic that is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions. The Pulsar Quantum 19S Thermal Imager has a wide range of operating temperatures with brightness and contrast control. With the Pulsar Quantum 19S Thermal Imager w/ Frost-resistant OLED Display you'll be able to see beyond what even night vision can offer.![]()
Specifications for Pulsar Quantum 19 Thermal Imaging Monocular:
| Detector type: | UL 03 16 2 (a-Si) |
| Refresh rate, Hz: | 9 |
| Magnification, x: | 2.1 |
| Digital zoom, x: | 2 |
| Resolution, pixels: | 384x288 |
| OLED Display size, in: | 0.31 |
| Close-up range, m: | 2 |
| Exit pupil, mm: | 8 |
| Spectral range, μm: | 7.7-13.2 |
| Field of view, HxV, degree: | 14.4x10.8 |
| Diopter adjustment, D: | ±5 |
| Max. detection range, m/yd: | 900/985 |
| Start-up time, sec: | 10 |
| Power supply: | 4÷6V |
| Battery type: | 4xAA |
| External power supply: | 8.4-15V |
| Operating time on battery EPS3/EPS5: | 9/20 |
| IP code: | IPX4 |
| Video output: | PAL/NTSC |
| Operating temp., °C: | -20 to +50 |
| Dimensions, mm: | 200 x 86 x 59 |
| Weight, oz: | 19.7 |
Features of Pulsar Quantum 19 Thermal Imager w/ Frost-resistant OLED Display:
- Quick start-up time (5 - 7 seconds)
- High resolution (384x288) microbolometer
- Fiberglass reinforced plastic is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions
- Three calibration modes - silent manual mode ("M"), automatic ("A") and semiautomatic ("H")
- Three operating modes - "City" (enhanced contrast), "Forest" (low contrast) and "Identification" (improved rendering of hot objects' details)
- Quantum imaging scopes are effective for the use in low temperatures (-25°C) thanks to the frost-resistant OLED display
- Control wheel located next to the lens allows the user to setup brightness and contrast
- Powered with four AA size (rechargeable) batteries
- Analog video output to enable connection of external recording equipment or transmitting image to the display
- Operation time of the unit can be significantly increased thanks to the use of external power supplies
Package Contents:
- Pulsar Quantum 19 Thermal Imager
Thermal Monocular Accessories






































































