Your Browser is OutdatedQ&A for Swampfox Kraken Closed Emitter 1x16mm 3 MOA Dot Sight — 29 Questions & 24 Answers
The Swampfox Kraken Closed Emitter 1x16mm 3 MOA Dot Sight comes with an RMR footprint adapter. So it will mount to an FNX45 Tactical using the RMR mounting plate from FN.
Yes, the Kraken does use a side-loading battery compartment for a CR2032.
No. The Kraken is compatible with the Springfield Echelon’s VIS mounting system and does not require a separate aftermarket plate system. It mounts using the included RMR plate and hardware configured for the Echelon.
Yes. The Kraken uses a proprietary mounting footprint and includes adapter plates for both the RMR footprint and the MOS system. It will mount to the S&W Performance Center 10mm using the included RMR plate and to the Glock 45 MOS using the included Glock MOS plate.
Yes. The Kraken is compatible with Glock MOS cuts, so it will fit on a Glock 17 Gen 4 that has an MOS-ready slide using the appropriate MOS adapter plate included with the optic.
No. The Kraken does not include an offset Picatinny mount. It comes with the mounting hardware and adapter plates needed for standard optic footprints like MOS or RMR as applicable, but the offset Picatinny mount is sold separately.
No. The Kraken uses a proprietary footprint and mounting system and is not compatible with Aimpoint ACRO plates. The included plates are designed for RMR and Glock MOS interfaces only.
Yes, the Swampfox Kraken 3MOA Closed Emitter Red/Green Dot Sight can be used on a CZ P10C, but only if the slide is factory optics-ready with an RMR pattern or if you use the proper adapter plates. The Kraken comes with RMR and MOS adapter plates included, so if your P10C’s slide is cut for Trijicon RMR, you can mount the Kraken directly using the RMR plate.
Yes. The Shadow Systems DR920 War Poet uses an RMR-pattern optic cut, and the Kraken uses a proprietary footprint but includes RMR and MOS adaptor plate, so it will mount correctly using the appropriate screws.
Yes, but only with the proper optic plate. The APX A1 FS uses a plate system, so you will need the Beretta RMR-pattern plate. Since the Kraken uses an RMR adaptor to meet the RMR footprint, it will mount correctly once the RMR plate is installed.