Your Browser is OutdatedQ&A for Vortex StrikeFire II 1x30mm 4 MOA Red Dot Sight — 196 Questions & 178 Answers
Yes, the sight will sit at lower 1/3rd co-witness on your rifle, allowing you to use your iron sights through the lower part of the optic view.
Yes, the Vortex Strikefire II 1x30mm 4MOA Red Dot Sight will function as intended and retain zero as long as it is properly installed on your rifle.
So long as you are running an appropriate picatinny mount, this optic is indeed compatible with the KR-103. We would recommend swapping the cantilever mount out with a medium-height Tactical 30mm ring, PN# TRM, for ideal cheek weld.
Here is a link: https://www.opticsplanet.com/vortex-tactical-30mm-riflescope-ring.html?_iv_code=VX-RR-TRNG-TRM
Yes, the Vortex Strikefire II 1x30mm 4MOA Red Dot Sight flip up lens covers are removable.
The optics would be fine, but the included cantilever mount would be far too high - it's intended for use on a flat top AR,where the barrel is in line with the stock. On a flat top AR, you have to get the optic up to the height of the original iron sights.
The PC carbine has more of a traditional drop to the stock, your eye is much lower. You would use something like the Vortex TRL:
Ring Height: Low
Code: VX-RR-TRNG-TRL
MPN: TRL
UPC: 875874002203
Located here:
https://www.opticsplanet.com/vortex-tactical-30mm-riflescope-ring.html
Mark H.
It will indeed! We would recommend using our medium-height 30mm tactical ring for best fitment, PN# TRM!
If mounted at the same height, yes!
This will indeed work on a sub-2000! With the included cantilever mount, it will ride significantly higher, however, a lower 30mm ring, like PN# TRM could be used in lieu of!
This can indeed withstand the recoil of your shotgun!
If mounted in a lower 30mm ring, like the Tactical 30mm medium (TRM), this should work - and look - wonderful!