Your Browser is Outdated
BKL Technologies Model 254 Mount, 4in Long Cantilever, 1 5/8 Clamping Length
Currently Unavailable
Compare (0)
1 item has been added
Add at least two items to compare
niabber's Review of BKL Technologies Model 254 Mount, 4in Long Cantilever, 1 5/8 Clamping Length
Used to mount a leupold vx-1 rimfire scope to a browning BL-22
1) extremely well made. No rough spots or burrs, edges very straight and clean
2) locks onto dovetail very securely and evenly across the base
3) screws are driven by a nice sized hex bit. Screws showed no signs of stripping after tightening
4) scope clamps tighten smoothly and are independent of the dovetail mount. Other rings i have had drop the dovetail when trying to adjust scope position.
5) Design gets scope forward on the rifle for proper eye relief without adjusting the natural rifle hold
Absolutely perfect for my rifle and scope combo.
I did careful measuring before ordering and went 4”. If in doubt on size I recommend going 4”.
1) extremely well made. No rough spots or burrs, edges very straight and clean
2) locks onto dovetail very securely and evenly across the base
3) screws are driven by a nice sized hex bit. Screws showed no signs of stripping after tightening
4) scope clamps tighten smoothly and are independent of the dovetail mount. Other rings i have had drop the dovetail when trying to adjust scope position.
5) Design gets scope forward on the rifle for proper eye relief without adjusting the natural rifle hold
Absolutely perfect for my rifle and scope combo.
I did careful measuring before ordering and went 4”. If in doubt on size I recommend going 4”.
Pros:
- Value (You get more than you pay for)
- well constructed and light weight
Cons:
- None
Would Recommend:
Yes