Bushnell 4.5-30x50 Argon Elite Rifle Scope MilDot
Currently Unavailable
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Legacy Reviewer's Review of Bushnell 4.5-30x50 Argon Elite Rifle Scope MilDot
This scope allows the user to "zero" the turrets after sighting in the rifle. This is accomplished by removing the allen-head screws that hold the turrets down, repositioning the turrets, then replacing the screws. There is an O-ring under each screw. Unfortunately, the manufacturer has not placed any silicone lubricant on these o-rings, so when you remove the screw, the o-ring sticks to it and gets totally shredded. I had to replace both o-rings (and lube them properly with silicone) after zeroing my turrets. This is a little disconcerting in a scope that costs this much money. Other wise, it seems to be a high quality scope. I am using it on a .50 BMG rifle and it has held zero so far for 30 rounds. Very sharp and bright even at high magnification thanks to the 50mm objective lens. With a lifetime warrantee, you have very little to lose. But plan on a trip to the hardware store for some small o-rings after your first sighting in.
Pros: Bright, quality construction, sharp optics
Cons: Read text
Pros: Bright, quality construction, sharp optics
Cons: Read text
This review was written in the old system and had content requirements that are different than reviews written today.
Would Recommend:
Yes
18 of 18
found the following review helpful.