A huge improvement - JP Enterprises AR-15 .154 in Small Pin Trigger Kit

I've had my AR for a number of years and have not spent much time with it. On my last outing I had ejection failures, so had to order the kit, and the trigger, stock mil spec, was terrible. I had an almost 8 pound pull weight which is not acceptable. I realize that a stock type AR may not be intended for marksman ship type shooting, but I know it is very capable. Not wanting to spend hundreds for a drop in trigger I went for the JP kit. This kit worked out really well once I went through the included DVD and instruction. I have to say the instructions are some of the best I've seen and go beyond installation of this kit by explaining issues with the AR trigger, stock or enhanced. Even providing a tech help call number if you have an issue. I did spend quite of bit of time refining the disconnector, I used the stock one from the AR instead of the one supplied by JP because it was a better fit right off. I worked it to what I would call a perfect fit. I did this using a stone and reassembly trial and error. It took me probably about 6 times or so because I did not want to have to redo the hook. The instructions call for leaving the hammer in place while you work the disconnector but you, I could not, cannot do this easily as the hammer spring sits on the trigger pin locking it in place. Not to mention when you remove the trigger pin the hammer spring drops down below the trigger pin. I used the red or heavier hammer spring to help ensure reliability with all ammo. I ended up with a pull of 4lb 2oz following the settings recommended in the instructions. For kicks I tried the yellow lighter hammer spring with the same settings and had a 3lb 4oz pull. The trigger is crisp and clean with very little over travel. I haven't fired it as yet but am confident this will work well. After a few rounds I may install the light hammer spring and may adjust the trigger return slightly. But we'll see. So fare a good kit for an overall improvement. Keep up the great work JP.