Your Browser is OutdatedNice but i learned something - Lancer Systems Benelli M1/M2 Magazine Extension
Compare (0)
1 item has been added
Add at least two items to compare
Jim's Review of Lancer Systems Benelli M1/M2 Magazine Extension
Nice product! Lightweight and easy to install on my Benelli M2. It comes with an extra long spring so you can taylor the length to suit your performance requirements. Here's what I learned. I ordered the +3 extension. After installing I realized it is only +3 if you still have the factory magazine plug installed in the magazine tube. I removed mine when I cleaned the gun the first time so I was already loading 5 in the tube. The compressed spring/follower takes up about 4 inches of the tube with typical spring length. So if you need more than 6 shells in the tube, you need to get a +4 or higher!
Confession - I got it because the gun looks "cooler" when the magazine tube and barrel are close to the same length! �
Confession - I got it because the gun looks "cooler" when the magazine tube and barrel are close to the same length! �
Pros:
- Lightweight
- Easy to install
- Looks cool
Cons:
- Only +1
Best Used for:
- ALL AROUND USE
Would Recommend:
Yes
1 of 1
found the following review helpful.