Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
j's Review of ODIN Works Tunable Low Profile Gas Block
First, it looks good. There’s no denying that part.
Downside, you need full access to it, by removing a two separate set screws. If your gas tube is short, in my case a carbine gas tube on a 11.5” barrel, with a tucked style hand guard. Making adjustments is a bit difficult. If your gas port is located close to the muzzle and your hand guard is shorter, making adjustments would be easier. In hindsight I should have bought a clicker style adjustment gas block.
Downside, you need full access to it, by removing a two separate set screws. If your gas tube is short, in my case a carbine gas tube on a 11.5” barrel, with a tucked style hand guard. Making adjustments is a bit difficult. If your gas port is located close to the muzzle and your hand guard is shorter, making adjustments would be easier. In hindsight I should have bought a clicker style adjustment gas block.
Pros:
- Looks good & inexpensive
Cons:
- Hard to setup
Best Used for:
- gas ports close to muzzle
Would Recommend:
Yes
1 of 1
found the following review helpful.