Your Browser is Outdated
Radian Weapons Talon Ambidextrous Safety Selector 2-Lever KIT
As Low As
$64.95
Save Up to 30%
View Product
Compare (0)
1 item has been added
Add at least two items to compare
WillEd11's Review of Radian Weapons Talon Ambidextrous Safety Selector 2-Lever KIT
I was looking for a way to go from a 90 degree safety selector to a 45 degree... and this product does just that. The left hand side safety is slightly longer than the lever on the right, but it looks great. Very happy with how it turned out and how it works. Great feel!
I will say for anyone reading this that has the Sig MCX platform, you'll need a pin punch tool to get the bar holding the safety in place on the right hand side of the firearm. It was not easy to remove. I eventually got it out by getting the punch set in a small groove of the pin and using a hammer to knock it out. Once I got the pin out, it was smoooooooth sailing and a quick install. If you don't want to scratch up your firearm while removing that old safety, I would recommend putting some tape around the old safety in case your pin or punch slip and you dig into the gun.
I will say for anyone reading this that has the Sig MCX platform, you'll need a pin punch tool to get the bar holding the safety in place on the right hand side of the firearm. It was not easy to remove. I eventually got it out by getting the punch set in a small groove of the pin and using a hammer to knock it out. Once I got the pin out, it was smoooooooth sailing and a quick install. If you don't want to scratch up your firearm while removing that old safety, I would recommend putting some tape around the old safety in case your pin or punch slip and you dig into the gun.
Would Recommend:
Yes