Your Browser is OutdatedOnce you get it together it works great - RCBS Pro Chucker Case Feeders
Review for RCBS Pro Chucker Case Feeders
Compare (0)
1 item has been added
Add at least two items to compare
Ultimate's Review of RCBS Pro Chucker Case Feeders
Unlike the primer slide bar this part has a wheel. But it came with a couple of parts missing, emailed RCBS and parts arrived. Then I found the platform the block with the wheel slides on to push the case would not go on. So my gun smithing from years of work and the Drimel tool with a sander went to work on the plat form. Now it moves like clock work and I love it.
Pros:
- Has a wheel not a pin
- works well with cases of 9mm
- once all together and operating it's great.
Cons:
- not all parts in the box
- Plat form was to big for part to slide on
- Had to sand plat form down to size
Best Used for:
- 9mm and 45acp casings
- You can hand prime and let the brass run
- Of course with the depriming pin removed
Would Recommend:
Yes
1 of 1
found the following review helpful.