Your Browser is OutdatedGood deal, good quality - Tacfire Muzzle Brake Crush Washers
Review for Tacfire Muzzle Brake Crush Washers
Compare (0)
1 item has been added
Add at least two items to compare
Scrap's Review of Tacfire Muzzle Brake Crush Washers
It's as advertised; 10x 5/8 Crush Washers. It's good to have these around if you are a builder / modder / tinkerer. These will work on any 5/8 threaded barrel with a brake or compensator that requires timing.
These do crush really well; I was pretty discouraged when I brake I was putting on needed almost ~340 degrees of timing (as in it was tight where the top was only about 20 degrees timed to the right position). You need some to crush it that far, but it does crush down and flatten out really well.
My personal thought is that a muzzle device should come with whatever is required to mount it, but that's not usually (ever) the case. All pros, no cons for this buy. If you need them, buy these.
These do crush really well; I was pretty discouraged when I brake I was putting on needed almost ~340 degrees of timing (as in it was tight where the top was only about 20 degrees timed to the right position). You need some to crush it that far, but it does crush down and flatten out really well.
My personal thought is that a muzzle device should come with whatever is required to mount it, but that's not usually (ever) the case. All pros, no cons for this buy. If you need them, buy these.
Pros:
- High quality
- Good deal
Cons:
- None
Best Used for:
- Muzzle brake timing
- compensator timing
Would Recommend:
Yes