DEMO, Magpul Industries Pro 700 Rifle Chassis, Olive Drab Green, MAG802-ODG

The Magpul Pro 700 Rifle Chassis is an uncompromising, full featured precision rifle chassis for short action Remington 700 actions and other Remington 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.

Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, lefties havent been left out.

made in specialized factories

Features/Specifications:

Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers.

Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8in hex wrench.

Folding stock with push-button activated durable steel hinge with Melonite finish is reversible for left or right folding capability with the use of a 5/32in hex wrench. A fixed stock adapter is available for a non-folding stock solution.

Folding stock is also designed to capture the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles.

Optional inline mount for clip-on night vision and thermal imaging devices.

Overall LOP adjustment range is 13.25in 15.125in.

Butt pad height can be adjusted up 1.33in and down .90in and is adjustable left or right 5 degrees.

Comb height adjustment has a 1in range with a secondary locking knob to eliminate movement in the cheek riser.

Cheek riser features a 3-position fore/aft adjustment of +.375in, 0in and -.375in which can also be changed for left or right side usage.

Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75in fore/aft trigger reach adjustment.

Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep).

Durable steel rotation limited QD sling swivel mounts with Melonite finish fits up to 1.5in push button swivels.

M-LOK slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2).

Integrated AICS pattern magazine well optimized for PMAG 5 & PMAG 10 7.62 AC magazines as well as most other AICS pattern short action magazines.

Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers.

Low-profile, anti-snag ambidextrous magazine release is made of Melonite treated steel for wear and corrosion resistance.

Ambidextrous thumb shelf for firing hand thumb placement.

Two 0.25 - 28x0.5in Socket Head Cap Screws are included for use as action screws.

Weight - 5.4 lbs.

Height at Butt Plate 5.2in.

Max width 1.86in.

Length 32.7in 34.6in (23.5in when folded).

Features of Magpul Pro 700 Ambidextrous Rifle Chassis w/Adjustable LOP, 55-RS0-PRO700RC:

• Compatible with short action Remington 700 actions and other Remington 700 footprint actions.
• Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers.
• Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8in hex wrench.
• Folding stock with push-button activated durable steel hinge with Melonite finish is reversible for left or right folding capability with the use of a 5/32in hex wrench.
• A fixed stock adapter is available for a non-folding stock solution.
• Folding stock is also designed to avoid interference with the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles.
• Optional inline mount for clip-on night vision and thermal imaging devices.
• Overall LOP adjustment range is 13.25in 15.125in.
• Butt pad height can be adjusted up 1.33in and down .90in and is adjustable left or right 5 degrees.
• Comb height adjustment has a 1-inch range with a secondary locking knob to eliminate movement in the cheek riser.
• Cheek riser features a 3-position fore/aft adjustment of +.375in, 0in and -.375in which can also be changed for left or right side usage.
• Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75in fore/aft trigger reach adjustment.
• Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep).
• Durable steel rotation-limited QD sling swivel mounts with Melonite finish fits up to 1.5in push button swivels.
• M-LOK slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2).
• Integrated AICS pattern magazine well optimized for PMAG 5 & PMAG 10 7.62 AC magazines as well as most other AICS pattern short action magazines.
• Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers.
• Low-profile, anti-snag ambidextrous magazine release is made of Melonite treated steel for wear and corrosion resistance.
• Ambidextrous thumb shelf for firing hand thumb placement.
• Two 0.25 - 28x0.5in Socket Head Cap Screws are included for use as action screws.
• Height at Butt Plate 5.2in. Max width 1.86in. Length 32.7in to 34.6in (23.5in when folded).

Package Contents:

• Magpul Pro 700 Precision Rifle Chassis, 55-RS0-PRO700RC