HBow2572 from United States, TX Public Profile

I had to grind off about 1/4 of an inch to allow clearance for my BAD lever, otherwise the lever would hit the mag release fairly easily. After I got done grinding and painting it up it worked flawlessly.

To me this was a no brainer, you’re basically getting an Aimpoint t2 and an EOTech xps3 in one compact package. However you are sacrificing half the battery life with the 2.0 MOA reticle compared to the T2 (this shouldn’t be a problem if you change your batteries annually), it’ll leave you with 2.5 years with the 2.0 MOA dot and 75 days with the 68 MOA reticle (which is 3 times longer than an EOTech xps3 with a 65 MOA reticle) on top of that you also get night vision capabilities with both reticles. The dot/ring is the most crisp I’ve encountered from a battery powered red dot, I would compare the quality of picture it to trijicons tritium reticles from their reflex sights or even RCOs. My only complaint with the optic was that in certain lighting the circuit board for the light emitting diode would reflect on the viewing lense, however I slapped one of Trijicons ARD flip caps on the front and this bad honcho and the problem was totally taken care of. Currently I have this optic on a LaRue cantilever QD Mount with an Aimpoint 6x magnifier on a LaRue QD flip Mount behind it and it works like a charm. I would recommend that set up for anyone wanting 6x magnification with an excellent red dot.