ko from United States, CA Public Profile

Purchased the SI Sig P365 slide as I've had good experience with SI parts to date. They have generally been well thought out and provide additional features not found on the generic comparables in the market. The SI P365 slide is no exception to my prior experience with SI parts. The serrations on the slide are distinct/aggressive and enable a firm purchase of the slide. They also have optional charging handles one can screw into the rear of the slide (see the three holes at the back of the slide in the pic?) which provide an additional ledge one can pull to rack the slide. The slide is also able to use an adaptor plate (not included) to enable red dots beyond the Shield footprint. My Holosun EPS Carry fit well on the slide however since the slide is cut to facilitate larger red dots, you lose an ability to put rear sights on the slide. Aesthetically, this also results in a gap behind a smaller red dot like my EPS where you would ordinarily see a rear sight post. If you do not plan on using the slide with a red dot, the included plate has a rear sight built into it. From a finish standpoint, the black slide I purchased is similar to a stock AR lower finish. Not a nice DLC or cerakote glossy finish but closer to matt though it does have a some sheen. I would liken it to eggshell finish paint. The other con is it does not come with any directions (online or in the packaging). Though mostly intuitive, I think it helps. One last note, this is just the slide, no internal parts are

Purchased the Ramjet for my P365 (smallest unit). Paired the Ramjet with an SI slide, Sig slide parts and a Holosun EPS Carry to have a second slide for my P365. The Ramjet noticeably reduced the upward recoil movement which is quite harsh on the base smaller P365 set-up. No issues with extraction using the stock P365 recoil spring while firing 115g Fiocchi FMJ and 124g Blazer FMJ at the range. Shot from 7 to 25 yards with excellent accuracy. Follow-up shots are able to be made more quickly as a result of the reduced movement. Would note that the increased length of the Ramjet also fits perfectly into my P365 Crossbreed Rogue Holster (w/ Streamlight TLR-7 light) allowing me to use it for CCW.

I purchased three of these to use at the range with my OG M&P Shield in 9mm. The product works great and is of high quality materials. I can't tell the difference between the Ed Brown magazines and the original S&W 8 round magazine that came with the gun.

Loaded this barrel on my Impact Precision action with MDT chassis. This barrel shoots lights out. I'm a novice shooter who goes out once a month for fun and I can shoot <0.5 MOA 5 shot groups with this barrel. My local range is limited to 650 yards and I have no problems hitting the targets to that range. I was so impressed by this Proof barrel that I bought one for my AR15 with similar results! Buy one, you won't be disappointed!

I (unfortunately) have these on three of my ARs, 2 AR15s and an AR10. Of the maglock convenience products out there, I think the Juggernaut is the best "complete" product and works equally well for either rifle build (i.e. AR10 or AR15). The highlight is the action open button in the back. Although there are other products with a similar look, the Juggernaut is the easiest I've used to remove and/or reinstall. This is necessary whenever you want to clean the barrel, upper or bolt. It simply requires you to unscrew a cap to remove whereas another popular product out there requires one to push the detent back to reinstall (not easy). The maglock itself is okay. It works great for me however t does make loading magazines a bit of a pain. The easiest way is to leave the action open and the second easiest is to pull the bolt back as you're loading the magazine. All in all, a very effective product. Oh, if you do decide to put this on an AR10, be sure to buy the right one as they have different length rear buttons for different makers.

I've used several different ambi CHs for both my AR15 and AR10. The Radian Raptor has been the best across platforms. The one piece handle and latch release design works great every time, pulling with either the right or left hand. Works much better than Aero or Strike ambi charging handles which separates the handle from the lever to release the catch. I now have purchased 4 of these! Great functionality with a variety of handle colors to choose from, A+ CH!

The AP 308 charging handle works great on my AR10. The handles are nice and wide and easy to grab despite my 4-24 scope eyepiece sitting right above it. While the handles are effective for engaging the charging handle, I prefer the one piece (i.e. handle is also the engaging lever) of the Radian Raptor ambi handles a little more (if you've used those). The AP handles are like the SI extended latch charging handle with a pulling lever and separately a handle (i.e. two piece) except you have the ability to pull from either the left or right side (SI is not ambi). Having said that, the AP ambi handles works well from either side and is a solid product.

This range bag fit my purposes perfectly! Strong nylon bag that small to medium in size. The main compartment store two full size handguns, range glass case, ear protection and range finder. I also lay a 10 magazine folding case on top. I use the one long side pocket to store additional ammo, about 200 rounds (100 of 9mm and 100 of 10mm) that I have in plastic ammo boxes. The other long side pocket has sleeves for 5 more magazines and other miscellaneous items. The end pockets I leave first aid (eg tourniquet, gauze, etc.) and the other end has cleaning supplies. Holds everything I need for the handgun range!

Purchased an 18" .308 barrel for an AR10 build. The barrel itself is very nice, black nitride is flawless with a polished interior. Viewing through a borescope, the lands are all very distinct and machined well. Was easy to put an adjustable gas block on it as there is a mounting indent on the top of the barrel. Shooting wise, I was able to generate sub-MOA groups with the barrel using 168 grain factory match ammo. Higher grain ammo (e.g. 175/178) did not shoot as tightly (>MOA) for me. Plinking ammo (e.g. Winchester M80, Fiocchi 150gr, etc.) all shot around 1.25-2 MOA. I'm sure better shooters and/or hand loaders could get it tighter. Great barrel for the price!

I have this and also the 507c. I don't think I can go back to a red dot that you have to turn on and off. The shake awake has never failed and it's great not having to think about turning the red dot on and off. The red dot itself is a nice size at 2 moa and I can pick it up quickly as it co-witness with my front site. The solar panel adds a bit of security to the battery which on its own lasts a long time. Fits on a standard rmr mount which I think it's harder to find a slide that doesn't have this built in! This is great for a handgun but I prefer the round circle or 507c which has both reticles on my ARs.