WoostaHog from United States, AR Public Profile

First off, the Acutrigger is a crisp, safe and reliable trigger. I do not like the safety shoe in the middle of the Acutrigger. This Timney is a great option and is very adjustable. The adjustable part is where it gets tricky. Once you look at the acutrigger, you understand why it has a safety block. There is very little material touching at the sear engagement point. This Timney requires VERY minute adjustments to get it with little creep, light pull, easy movement in the safety and not go off unexpectedly. I had to re-adjust mine twice before feeling safe to operate it without a slam fire or firing pin going off just by moving the safety from position 2 to fire. I got mine set to 1.75# on a Savage Stealth Evolution in .338 Lapua Magnum. Watch the videos, read forums, and be informed of the safety issues with this trigger. It does work and work well if installed and adjusted properly.

Attached to my Sig MCX perfectly with tight tolerances and no wiggle. The folding action is stiff at first but will be easier over time with use. Locks in the folded position and can be immediately unfolded with a firm pull, no buttons to push. Combine this with an SBA-3 tactical brace and there you have it!

Have the MOAR-T reticle and find it perfect for my type of precision shooting. Could see where the fine crosshair could get lost in busy/dark backgrounds. Glass is outstanding, tracking is spot on. I dial alot and constantly back to zero. Mechanically precise. You get what you pay for.

Installed on my GAPrecision .260. I simply removed the top half of my rear ring and slowly torqued it down to perfect level. A simple peek up from cheek weld and you can check level. Very responsive. Highly recommended.

After an exhaustive search, I chose this optic to top out a DD5V1. I got the fire dot reticle (model 172368) and couldn't be happier. At 3x it works well enough to be used as a red dot. Typical Leupold quality and clarity. One of the main deciding factors with this optic was its light weight. Can't wait to get some load data and get my CDS dials! Don't be confused by the four star review as I rarely give anything five stars!