by
David,
Verified Owner
from ID, United States
Written on December 13, 2025
So far, so good….. installed easily and the controls are very user friendly. Clear reticle/dot. Almost perfect zero out of box and aligned nicely with my suppressor height front post. Too new to talk about durability, but the build/finish quality is right up there with my Delta Point Pro.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Matt,
Verified Owner
from GA, United States
Written on June 4, 2025
The RMR mounting plate did not fit my RMR cut Norsso or L2D Glock slides.
Would require significant modification of the slide and/or mounting plate. Even with modifications, mounting holes do not align well causing issues with the screws that fix the plate to the slide.
Optic itself seems higher quality than expected but have not been able to use it at the range for obvious reasons.
Cons:
- horrible mounting solution
Would recommend: No
0 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Gary,
Verified Owner
from ID, United States
Written on March 9, 2025
Nice sight for the money. The choice of reticles is nice. Had to do a little filing on the base plate to make it fit the slide on my Glock clone. Auto-brightness is nice, works well in daylight, but doesn't go dim enough for night work unless using weapon mounted light (had to manually adjust for that). My biggest complaint is the sight base. Because of the mounting plate, the sight sits high enough that it blocks my suppressor height night sights. With the open emitter sight I was using, I could see the iron sights thru the optic. Not with this one. I might move this sight to a PDW.
Would recommend: Yes
2 of 4 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Scott,
Verified Owner
from CO, United States
Written on February 23, 2025
Well made sight, crystal clear glass and crisp emitter.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Madada IWI,
Verified Owner
from TX, United States
Written on February 8, 2025
So far, so good. Finish is good. Clear crisp glass. Sits high on slide bit I also ordered a dedicated plate. Comes with dedicated tool for zeroing. Bought for my masada iwi.
Pros:
- clear glass
- bright dot
- Clairity
- Matte finish
- Crisp recticle
Cons:
- sits high
- need suppressor sights to cowitness
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Dave,
Verified Owner
from MN, United States
Written on January 29, 2025
Very nice dot. Well thought out, nice clear glass. Easy install and zero.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Ryan Greenidge,
Verified Owner
from MD, United States
Written on January 24, 2025
this is an awesome emitter very clear glass...prefer it to my other higher end optics ...loved it so much ordered a second one...PRICE WAS GREATAND DELIVERY WAS FAST
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Tony,
Verified Owner
from MD, United States
Written on December 16, 2024
Meprolight MPO Pro -F arrived and not able to powerup. Just started RMA with Meprolight. Slow shipping with Optics Planet followed by slow return to Meprolight, followed by mail of new unit, probably get to use this in January sometime. Not impressed.
Would recommend: No
1 of 3 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Mike,
Verified Owner
from FL, United States
Written on December 8, 2024
RMR footprint. 33 MOA circle with a 3 MOA dot in the center. Easy dot acquisition. Automatic brightness feature. Rugged design. Great glass clarity. Easy to operate and install. Great price point. and NOT made in china~!
Pros:
- easy to use
- rugged
- bright
- Not Chinese
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
rhy,
Verified Owner
from IL, United States
Written on October 17, 2024
This Pro F and S series of optics are excellent. I own both and buying a third.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?