by
Alex Harrison,
Verified Owner
from MS, United States
Written on October 29, 2024
This muzzle brake has tamed the recoil on my sako s20 300 win mag shooting 178 gr bullets.
My rifle has the recoil of my 22/250 now. It is well worth the money.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Phantom,
Verified Owner
from CA, United States
Written on October 9, 2024
This thing works great it does exactly what it was designed to do and on top they have partially drilled holes which I did need to use sum of them to keep muzzle down the instruction are clear on what size hole to drill and what percent it will give you per size drilled —- great product great website
Best Used for:
- I put this on a Begara HMR in 6.5 PRC and it works great
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
yack,
Verified Owner
from PA, United States
Written on June 16, 2024
Break is great really knocks down the recoil making longer shooting sessions enjoyable
Pros:
- Exceptional recoil reduction
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Gunny10mm,
Verified Owner
from OR, United States
Written on June 4, 2024
New built HOWA 1500 .308 24" Heavy.
Started with VG-6 muzzle break taken off my AR-10.
I put about 150 break-in rounds through it over 2 days with a little tenderness to the right shoulder. Wasn't bad but still could not see the hit at 100 yards.
Just purchased the Hypertap and installed it last evening. Went out this morning and put 70 rounds out. I could actually see the hit on 7 out of 10 rounds. ZERO tenderness. Here I set three hours later and can't tell I shot today.
Ammo: Reloads, 41 grains of Precision Rifle pushing a 175 grain Sierra Match King.
Shot from Caldwell's $500+ dollar shooting table. Also a wonderful experience.
Will be at the 720 yard range next week. No doubt in my mind that I will see every round hit.
My sincere thank you to all the folks at Precision Armament for the development of this break.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
yack,
Verified Owner
from PA, United States
Written on May 25, 2024
muzzle break is great looks good does what its supposed to do makes a 300prc feel like a 223 excellent product definetly will buy again
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Y2khunter,
Verified Owner
from CA, United States
Written on October 21, 2023
My son and i bought identical s&w ar10 in 308.we set one up with this brake and the other we tried 4 different brands and we both felt this was the best.less felt recoil.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Y2khunter,
Verified Owner
from CA, United States
Written on June 25, 2023
We set up 2 identical ar10 308. 1 with this brake on it and the other we would swap out in between 4 other brands.and no muzzle device. This one came out the winner in aesthetics ,size recoil reduction. Does give a increase in muzzle blast. But there is no free lunch.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
stuckincali,
Verified Owner
from CA, United States
Written on March 26, 2023
I bought this for my Savage 110 in 300Wmim hopes of taking it some. Having such a high claimed recoil reduction, I had high expectations, but still thought I would be able to feel the recoil. Boy was I presently surprised! Not only did it reduce the felt recoil, but diverted the noise away from my ears too. I was able to shoot a box of Winchester 150 grain dear loads and a box of 165 grain PPU loads like I was shooting a a 308, I was even able to shoulder for it without getting knocked back, or drilling the upper ports. Highly recommend, but be sure to really crank down on the nut, it came loose after 2 rounds.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Chris,
Verified Owner
from OK, United States
Written on October 28, 2021
The product looks very nice, clean and well made. The tool used to tightening tool slips very easily on the front of the brake, in my experience it was to the point it became near useless. The tools also marked up the brake with shiny metal transfer. As far as performance, it was amazing. Firing five shot groups with and without the brake mounted and it was like night and day.
Cons:
- Included tools difficult to use.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?