Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Poor quality
Guide rod is not smooth as you would expect, rough and bumpy. While I don't think it will cause any issue mechanically, you get a nice scraping sound of the spring on the guide rod. A standard Beretta plastic and metal guide rod both feel smooth and are virtually silent once lubed. Perhaps after a 10,000 rounds the roughness of the guide rod will smooth out from the scraping.
Guide rod diameter is also much thinner than a stock rod which visually looks odd and I if I used my pistol in adverse conditions I would be worried about dirt getting into the end.
All downsides to this product over a stock with the only plus a supposed possible spring life increase...
Guide rod diameter is also much thinner than a stock rod which visually looks odd and I if I used my pistol in adverse conditions I would be worried about dirt getting into the end.
All downsides to this product over a stock with the only plus a supposed possible spring life increase...
Would recommend: No
The idea is good
This piece wore out in 200 rounds of basic training ammo. The rubber does make a noticeable difference when shooting in how the recoil feels softer. Could just be my pistol that recoils a little too hard. Good idea though.
Would recommend: No
Wilson Combat shock buffer
The Wilson Combat shok - buffers are a little expensive for a little peace of palamer plastic but if you're cracking pretty hot loads they will keep the slide from battering your frame and possibly causing serious damage to your pistol.
Pros:
- Cheap insurance
Cons:
- None
Best Used for:
- hot loads
Would recommend: Yes
WC Shok-Buff
These are a perfect complement to any beretta 92fs. They fit great and make sense. You don't even know that it is there. Saves frame, not additional weight or bulk. I purchased spares as you can never have enough of these.
Would recommend: Yes
Great if they fit
They work great to reduce frame/slide battering if they fit, as they do in my Delta Elite 10mm with the Wilson guide rod and spring. They arr a bit thick in combination with the slightly thicker guide rod flange on my Kimber 45 and prevent the slide catch from engaging on the last shot. I would give them 5 stars if they were slightly thinner to be a universal fit with all guide rods.
Would recommend: Yes
0 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?