Blitzkrieg Components Kynshot Pcc Buffer Weight/Spacer R15015098 Color: Stainless Steel, 23% Off

Our PCC buffer weight can be used with either of our PCC hydraulic buffers to add mass in front of the buffer. It adds .75'' in length to the buffer system, adds 2.5 ounces in weight and is designed for a close fit in buffer tube to prevent tilting of the buffer during cycling. The weight has several functions - the additional mass further delays initial bolt movement and slows the bolt velocity, it helps to keep the buffer aligned in buffer tube and keeps impact straight on buffer for best effect and longest service life, and it's additional length can be used to make a short stroke system if desired. Has flats on 3 sides to allow for air flow.

The PCC buffer weight is inserted into the buffer tube after you insert the buffer and spring, so the weight is in front in the buffer tube. During cycling, the weight is between the bolt and the buffer.

If you want to use this weight and have your bolt cycle the full distance and get behind the bolt catch, then you need to use an AR-10/A5 length buffer tube since they are .75'' longer on the inside. If you use this weight with our buffer in a typical AR-15 buffer tube it will create a short stroke system that stops forward of the bolt catch. Additional mass is very important in any PCC short stroke set up since the bolt doesn't have as much time to slow down. We believe this additional weight has a positive effect in any AR PCC build whether full stroke or short stroke and with any barrel length.

Optimal set up - We believe that the optimal set up for most 8-16'' barreled guns is to run this PCC Buffer weight in front of an RB5015HD buffer with a .308 carbine buffer spring in an AR10/A5 buffer tube for full bolt stroke. If your bolt has a weight pinned into the rear of it, we recommend leaving that in place to retain full mass of your bolt. We do have customers who like the short-stroke set up the best and everyone's perception is a bit unique, but it has been our experience that the full-stroke set up is the smoothest running and softest recoiling overall and you retain the use of your bolt catch. So full stroke either with or without this weight recommended.

This weight can be used with either the standard RB5007 buffer or the RB5015HD buffer. The weight is made of machined 17-4 Stainless Steel.

Specifications for Blitzkrieg Components Kynshot Pcc Buffer Weight/Spacer:

Features of Blitzkrieg Components Kynshot Pcc Buffer Weight/Spacer

• Increased Mass: Adds 2.5 ounces of weight and 0.75'' in length to the buffer system, delaying initial bolt movement and slowing bolt velocity.
• Improved Alignment: Ensures better alignment of the buffer in the buffer tube, preventing tilting during cycling for better impact and longer service life. (Results in more consistent impact.)
• Short Stroke System (if desired): Can be used to create a short stroke system when paired with an AR-15 buffer tube.
• Air Flow: Features flats on three sides to allow for air flow.
• Versatility: Compatible with either the standard RB5007 buffer or the RB5015HD buffer, and can be used in a variety of AR PCC builds.
• Machined 17-4 Stainless Steel
• Increased Mass
• Reduced Bolt Velocity
• Super Smooth Running
• Faster follow up shots
• Keeps buffer aligned

Package Contents:

• Blitzkrieg Components Kynshot Pcc Buffer Weight/Spacer

This product is compatible with the following gun models: Ruger Police Carbine