Your Browser is Outdated
Tap Tap to Zoom
- Red Dot Sights-Footprint:
- Deltapoint Pro
- Included Accessories:
- Screws
- Optic Cut:
- Not Applicable
- Fabric/Material:
- 7075 Aluminum
Code: KK-SAP-GVBW-49408
MPN: 49408
UPC: 841370114221
Product Info for Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
This Mount Fits:
- H&K VP9
- H&K VP9SK
- H&K VP40
- H&K P30
- H&K P30L
- H&K P30SK
- H&K 45
- H&K 45C
This mount is not intended for use with the optics ready version of these pistols.
This Mount Does Not Fit:
- HK USP
NOTE: For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.
Installation Instructions:
- Remove the rear sight
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
Specifications for Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40:
| Manufacturer: | Evolution Gun Works |
| Red Dot Sights-Footprint: | Deltapoint Pro |
| Included Accessories: | Screws |
| Optic Cut: | Not Applicable |
| Fabric/Material: | 7075 Aluminum |
| Color: | Black |
| Mount Type: | Dovetail |
| Fit: | H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40 Sight |
| Length: | 1.604 in |
| Width: | 0.99 in |
| Finish: | Matte Black Hard Coat Anodized |
| Gun Make: | Heckler & Koch |
| Gun Type: | Pistol |
| Condition: | New |
Features of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40:
- Fit Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount)
Package Contents:
- Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40
Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For H&K VP9, VP9SK, P30, P30L, P30SK, HK45, HK45C, VP40 Orderable Models
List of Orderable Models
- Evolution Gun Works Leupold DeltaPoint Pro Sight Mount, JPoint, Redfield Accelerator, and Optima, H&K VP9, P30, P30L, HK45, and HK45C, Black, 49408 , MPN: 49408 , UPC: 841370114221 , Code: KK-SAP-GVBW-49408