WILL this fit a IWI GAR 1639 GALIL ACE 7,62X39 RIFLE — 8 Answers

Yes! But..... The galil ace rifles use a narrow hammer, a separate trigger spring, and a double hook trigger. While this trigger will function in the ace, there are some things to change. First, shave the hammer to the width of the OE to ensure ample room as iwi intended to have in the receiver. This clearance is for reliability to allow debris to pass by without lodging the trigger against the fat rails in the galil ace's milled receiver (whereas stamped rifle rails are cut away for clearance). Factory hammer spring will also need to be replaced to a standard ak/akm spring (recommend alg high power main spring). This is mandatory because standard ak triggers, like this alg, rely on the main spring to reset the trigger. Iwi uses a shortened main spring, and the factory trigger is reset by a beefy spring in the trigger itself. Deleting this trigger spring without installing a full length main would risk incomplete resets and a dangerously low pull weight. A double hook trigger means jack diddly to performance, just another difference between the factory and this. I love my ALG in my galil ace 7.62x39.

Actually it will fit a Galil Ace and there is already a year old video on YouTube showing it run.

Yes it most certainly will, but you'll have to slightly modify it !

Yes it will. You may need to fit the roll pin a little bit but it will definitely fit.

In theory only does ALG sell a trigger for a Galil ACE. It has not been available for years and is not likely to be in the future. Nobody seems to know why.

AKT AK ALG trigger WILL NOT WORK on GALIL ACE X39

No it will not, alg does sell a galil specific trigger though.