Your Browser is OutdatedQ&A for Christensen Arms Remington 700 Detachable Magazine Bottom Metal — 16 Questions & 12 Answers
The Christensen Arms Remington 700 Detachable Magazine Bottom Metal should work fine with that rifle.
The magazine at the link below should work.
https://www.opticsplanet.com/accurate-mag-accurate-aics-long-action-sssf-magazine-300-rum-375-h-h.html
You will need AICS pattern magazines for the Christensen Arms Remington 700 Detachable Magazine Bottom Metal. The magazine at the link below should work.
https://www.opticsplanet.com/mdt-aics-300-wsm-6-5-prc-metal-magazine.html?_iv_parent-cartridge=7mm-prc,6-dot-5-prc
The Christensen Arms Remington 700 Detachable Magazine Bottom Metal long action models will work with that rifle.
The correct Christensen Arms Remington 700 Detachable Magazine Bottom Metal for your rifle would be model MPN:810-00029-02 (Hunter), or MPN:810-00029-03 (Tactical). You will then need an AICS (3.715") long action magazine like the MDT Long Action Metal Magazine which can be found by using the link below:
https://www.opticsplanet.com/mdt-long-action-metal-magazine.html?_iv_caliber-193146313=dot-300-winchester-magnum&_iv_additional-features=long-action-3-dot-715-inch
It is recommended a gunsmith install the Christensen Arms Remington 700 Detachable Magazine Bottom Metal.
The Christensen Arms Remington 700 Detachable Magazine Bottom Metal is compatible with with Remington 700 type actions and should be compatible with your Christensen Arms Ridgeline.
You will need the Short Action model of the Christensen Arms Detachable Magazine Bottom Metal for a 6.5PRC Ridgeline. This is model number 810-00029-01.
yes, but you will need to find correct magazines for the ammunition.
You will need the short action model of the Christensen Arms Detachable Magazine Bottom Metal for a Ridgeline chambered in 6.5 Creedmoor. The model number you need is 810-00029-01.